I have a set of bronco doors that have been customized for summer use. These doors were built to go on my bronco in the summer but unfortunately I sold the bronco. The door had the window frames removed and the top part of the pocket shaved. The lock holes were shaved and all spots in the jam of the door related to the window bolt in areas(pockets at the bottom and side bolt holes)were shaved as well. These doors were very clean with nice seams to start. I stripped them to bare metal and epoxied them before doing any bodywork. Next the bodywork, then three coats of high build primer. I will ship them anywhere at buyers cost. They are not super heavy due to having no windows or regulator or window frame. Hopefully they wont be to expensive to ship. These doors are truely unique and will definately set you apart. I am aware that the door panel will still have the window crank hole in it. I have already thought about that and I will send two plugs to go over this area or you can shave those yourself on your panels. I dont have a set of door panels or the time to shave a set. These doors will require door latches(remove the door lock rods). These doors are ready for paint for your bronco(IN DUPONT TAN PRIMER WITH GUIDE COAT). Thanks for checkin out my listing.
P.S. I BELIEVE THESE CAME OFF OF A 72.
http://s477.photobucket.com/albums/rr135/mmpp71/
P.S. I BELIEVE THESE CAME OFF OF A 72.
http://s477.photobucket.com/albums/rr135/mmpp71/
Last edited:
