• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Shackle reverse, stock ride height?

Dan76

Sr. Member
Joined
May 17, 2006
Messages
895
Ok so the title says it. I want to reverse my shackles but want my ride height to stay where its at. Have any of you done this? I was thinking of just using the stock shackle and welding the mount higher on the frame. Let me know what you think, if any of you have done it show me some pics!
 

76Broncofromhell

Bronco Totalitarian
Joined
Jul 30, 2001
Messages
4,250
Loc.
Grass Valley, CA
Why? You do it for lift and flex. You aren't really going to gain anything by doing what you propose.

Also I think you mean a "shackle flip" - not "reversal". That small oversight might affect the use of the search function as this has been discussed extensively in prior threads.
 
OP
OP
Dan76

Dan76

Sr. Member
Joined
May 17, 2006
Messages
895
On most vehicles the shackle sits below the mount on the frame. On our EBs the shackle sits above the mount, most people do a shackle flip to gain lift. I just want it for the performance gain, it allows for more droop because it takes the bind off the shackle.
 
Top