Show off your mirrors thread

[drscotch]

These are off a Kubota UTV - 14.00 for this one.

The Kubota was the only one I found with a 2" bar clamp. It is cheap, doesn't wobble, and is out of the way when I get in and out of the truck.

Nice. Thanks!

 

[trlblazr]

I am in the process of mounting some motorcycle mirrors on mine. I traced the contour of the door on paper on taped it to a mill and digitized the line, and then I entered it into a cad program and posted code to it. The machine did the rest. Here is where it is now:

 

[trailpsycho]

Trailblazer- Those look sweet...keep us posted as it comes together...

 

[73stallion]

custom made my own mounts on mine to mount a light on each side. then used a CJ-7 mirror assembly with bicycle seat quick releases for narrow spots. then got 6" convex mirrors for the heads.

i have a set of 7" stainless square mirror heads if anybody needs them.

 

[trlblazr]

Trailblazer- Those look sweet...keep us posted as it comes together...

Thanks trailpsycho. Here they are mounted. The rubber gasket is too thick though. I am going to use a piece about half as thick.

 

[mudstud]

trlblazr when are you going to start mass-producing these?

 

[matt w]

I put these Honda 1800 VTX mirrors on my Tube Doors last month!

..The price for the mirrors was right... FREE !

 

[BLUE72]

trlblazr
What blue did you paint your bronco?

 

[73stallion]

matt w, how about a pic of those gas caps?

 

[matt w]

matt w, how about a pic of those gas caps?

Why? ;D
...here is what I have for now.

..........do you want a closer shot?

 

[Steve83]

.

BTW
He decided NOT to use the fender badges shown in that 1st pic - it's just the best one of the bubble-back mirrors. The 2nd shows the electronic RV mirror.

 

[73stallion]

Why? ;D
...here is what I have for now.

..........do you want a closer shot?

when you get a chance if you don't mind. i see some billet around those filler necks!

 

[trlblazr]

trlblazr
What blue did you paint your bronco?

The paint is House of Kolor Majik Blue the code is PBC37.

 

[trlblazr]

trlblazr when are you going to start mass-producing these?

I don’t think there would be much of a demand for these to make a batch.

 

[Bitch'nBronco]

I don’t think there would be much of a demand for these to make a batch.

I might be interested if you start making a bunch, I couldn't find mirrors that mounted cleanly, so I had to get a pair off of an old Subaru today

 

[methcat]

Can't see how they are mounted with that label. Makes me wonder what they are covering up - there is plenty of room in the photo to move their label. Note they covered the mounting points on either side with a separate label.

what's funny is i asked for a pic of how they are mounted, and the guy told me that if his feedback wasn't good enough for me, i was out of luck and couldn't see the mounts for myself... nice.

 

[bigjhoov]

That's because he's not fabricating ANYTHING! THose are jeep cj mirrors that you can buy all day long for a 1/4 of what he's getting for them. All you do is turn one of the feet around so they will fit between the hinge and winshield gasket. Here's a set........

http://cgi.ebay.com/ebaymotors/Jeep...c0.m245&_trkparms=65:12|39:1|72:1205|240:1318

 

[bigjhoov]

Or I've seen people use this style mount....

http://cgi.ebay.com/ebaymotors/Jeep...c0.m245&_trkparms=65:12|39:1|72:1205|240:1318

 

[Smokeater11]

Here are some of the BB and F series mirrors I just finished bolting on. They were chrome but I blacked them out. Look at the rest of the rig and you can figure out why....

 

[cgbexec]

Here are my CJ mirrors. I also did a complete write up on the install in the Tech forum. Just search CJ Mirrors in the Tech forum. It shows the exact modifications needed to mount them to the outside edge of the windshield frame so the windshield can still be layed down. They do shake a bit, but they are big enough to see well out of.