• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Side mirror placement

Cmaxx252

Contributor
Jr. Member
Joined
Nov 13, 2023
Messages
73
Loc.
Bakersfield
I removed the foldable mirrors and want to land some smaller oe style mirrors. Im unsure on where exactly to locate them in order to clear the wing windows.
Does anyone have a diagram showing measurement where they went from the factory? Or can someone point me in the direction of their bronco with the smaller side mirrors so i can reference.
Holes aren't an issue as I will fill the old ones in my door and make new ones.
Also I posted picture of my mirrors for reference. Is there a certain way the mirrors go? one angle they extend more horizontally, the other they're more upright.

Thanks in advance
 

Attachments

  • side mirror 3.jpg
    side mirror 3.jpg
    76.9 KB · Views: 221
  • side mirror 2.jpg
    side mirror 2.jpg
    76.6 KB · Views: 238
  • side mirror 1.jpg
    side mirror 1.jpg
    76.2 KB · Views: 178
  • side mirror.jpg
    side mirror.jpg
    74.3 KB · Views: 196

Shimmy

Contributor
1977 Bronco
Joined
Jun 20, 2021
Messages
1,396
Loc.
Maple Valley
on mine i lucked out and while i was sanding that area the original holes revealed themselves. i could also see the "nutserts" from inside the door panel. are any of those visible on you?

i can take measurements and pics of my mount location when i get home today.
 
Last edited:

SLOWnEASY

Contributor
Sr. Member
Joined
Sep 26, 2022
Messages
525
Loc.
San Diego, Ca.
On my 77 the drivers mirror is 1.5" from the center of the front screw to the rear of the wing channel. Personally if I could move it I would put it further forward to where I look at it through the wing window. Obviously that would cause issues with opening the wing window. But currently my roll bar is in the way of opening that window too far so it doesn't matter to me. But I mention it because it might matter to you.
 

Attachments

  • Mirror.JPG
    Mirror.JPG
    121.3 KB · Views: 188
OP
OP
Cmaxx252

Cmaxx252

Contributor
Jr. Member
Joined
Nov 13, 2023
Messages
73
Loc.
Bakersfield
on mine i lucked out and while i was sanding that area the original holes revealed themselves. i could also see the "nutserts" from inside the door panel. are any of those visible on you?

i can take measurements and pics of my mount location when i get home today.
I did not some old filler out of the door which revealed a few different holes, only one lined up that fits the description of slowneasys post below this. If you have time to send pics of yours id appreciate it. I will end up sanding down the top portion of the door to see if any at all are there. Thank you for the response.
 
OP
OP
Cmaxx252

Cmaxx252

Contributor
Jr. Member
Joined
Nov 13, 2023
Messages
73
Loc.
Bakersfield
On my 77 the drivers mirror is 1.5" from the center of the front screw to the rear of the wing channel. Personally if I could move it I would put it further forward to where I look at it through the wing window. Obviously that would cause issues with opening the wing window. But currently my roll bar is in the way of opening that window too far so it doesn't matter to me. But I mention it because it might matter to you.
Thank you. I will measure this out and see how they line up. I found one hole on the passenger door after knocking out some filler. The driver side have none to show as of now but I will sand down through the paint to confirm. Those smaller mirrors would be better farther forward but eliminates the wing window usage. My cage is out of the way of the window and id like to have them functional as im not running ac.
Thank you for the response.
 

Shimmy

Contributor
1977 Bronco
Joined
Jun 20, 2021
Messages
1,396
Loc.
Maple Valley
pics
 

Attachments

  • image.jpg
    image.jpg
    145.9 KB · Views: 170
  • IMG_3711.jpeg
    IMG_3711.jpeg
    142.9 KB · Views: 186
  • IMG_3710.jpeg
    IMG_3710.jpeg
    167.3 KB · Views: 179
  • IMG_3709.jpeg
    IMG_3709.jpeg
    137.6 KB · Views: 176
  • IMG_3708.jpeg
    IMG_3708.jpeg
    117.9 KB · Views: 132
OP
OP
Cmaxx252

Cmaxx252

Contributor
Jr. Member
Joined
Nov 13, 2023
Messages
73
Loc.
Bakersfield
These pictures and measurements were very helpful. I now know which holes i need to fill lol. I have a lot of options. The hole with the yellow circle is in the original vicinity of the front hole location for the smaller mirrors.
side holes.jpg
side holes 1.jpg
 
Top