Airmapper
Foolproofness Tester
I just pulled these off my Bronco, I will be needing a winch bumper front, and tire carrier in the rear, so these are not suitable for my intentions. They are however fine for the mostly street driven rig that doesn't need utility bumpers.
I'm sure these will fit a Bronco, I pulled them off mine. However my front frame horns looked hacked on. The idiot PO may have done this for a number of reasons, which may have nothing to do with these bumpers, lord knows it's not the only modification I've found that didn't make sense. My rear frame horns look untouched, and the rear fit fine.
Bottom line before you buy I'll gladly take measurements to ensure fit, if you can sketch up the dimensions on your good frame horns. I just won't make out like I'm absolutely positive on the front, since my frame horns aren't a good standard to compare by.
These appear to be 3" tube, the front has a grille hoop and light tabs. No end caps on either bumper, but you can buy them new (LINK to some I found). Paint is still adequate, but could need a refresh.
Hardware will be included that it was attached with, including metal spacer blocks.
Hella lights not included.
Asking $220 for the set.
Local sale preferred, and I'll meet you part way if it's within a reasonable distance.
Shipping is possible on your dime, we would have to work out the method but if you don't mind waiting for me to sort it out, I'm open to the idea. Use Bowling Green, KY, Zip 42101 if you want to check out possibilities. They are oversize and heavy, I can measure and weight if anyone is interested.
Photos attached are from when the bumpers were installed, if you want more detailed images, just ask and I'll post them up.
Thanks for looking!
I'm sure these will fit a Bronco, I pulled them off mine. However my front frame horns looked hacked on. The idiot PO may have done this for a number of reasons, which may have nothing to do with these bumpers, lord knows it's not the only modification I've found that didn't make sense. My rear frame horns look untouched, and the rear fit fine.
Bottom line before you buy I'll gladly take measurements to ensure fit, if you can sketch up the dimensions on your good frame horns. I just won't make out like I'm absolutely positive on the front, since my frame horns aren't a good standard to compare by.
These appear to be 3" tube, the front has a grille hoop and light tabs. No end caps on either bumper, but you can buy them new (LINK to some I found). Paint is still adequate, but could need a refresh.
Hardware will be included that it was attached with, including metal spacer blocks.
Hella lights not included.
Asking $220 for the set.
Local sale preferred, and I'll meet you part way if it's within a reasonable distance.
Shipping is possible on your dime, we would have to work out the method but if you don't mind waiting for me to sort it out, I'm open to the idea. Use Bowling Green, KY, Zip 42101 if you want to check out possibilities. They are oversize and heavy, I can measure and weight if anyone is interested.
Photos attached are from when the bumpers were installed, if you want more detailed images, just ask and I'll post them up.
Thanks for looking!
