• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Smittybuilt 6 point roll cage

SSDDBRONCO

Bronco Guru
Joined
Nov 12, 2009
Messages
2,172
Loc.
Los Angeles
Hey i was wondering if the Smittybuilt 6 point roll cages are good. I dont do anything extreme but if it even does turn over (hope not knock on wood ;D) would it protect me and the passenger. Would you recommend it for 200 dollars? Worth it or not.
Thanks
 

ET

Contributor
Bronco Guru
Joined
Jun 14, 2001
Messages
1,800
Loc.
Dallas, TX
Their cage is alright but you should add more braces. I think the size is either 1.75" or 2" tube HREW. I didn't think they were still making them for broncos.

Eugene
 
OP
OP
SSDDBRONCO

SSDDBRONCO

Bronco Guru
Joined
Nov 12, 2009
Messages
2,172
Loc.
Los Angeles
Their cage is alright but you should add more braces. I think the size is either 1.75" or 2" tube HREW. I didn't think they were still making them for broncos.

Eugene

no they dont make them for broncos anymore i just found a used one for 200 dollars and wanted some input if they are good cages or not. Is the San Felipe roll cage good? Also Eugene what do you mean by more braces?
Thanks
 

ET

Contributor
Bronco Guru
Joined
Jun 14, 2001
Messages
1,800
Loc.
Dallas, TX
I meant to add extra tubes to brace the whole cage. I plan on adding two parallel tubes to the top at the center. One across the front legs and one between the main hoop legs. Then tie it to the frame. There's a lot of people that run them as is and I've seen them held strong in a roll. I just want to making it stronger.

Eugene
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,124
Loc.
Cuchara, CO
no they dont make them for broncos anymore i just found a used one for 200 dollars and wanted some input if they are good cages or not. Is the San Felipe roll cage good? Also Eugene what do you mean by more braces?
Thanks

Actually I'm running an old smittybilt as may main hoop and I got the front kit for the San Felipe from WH. Fit up just fine. I would think the San Felipe is at least as good as the smittybilt, if not better.
 

trailbound

Full Member
Joined
Feb 13, 2007
Messages
217
It will work just fine, and technically there shouldn't be any difference between it and a WH cage. $200 isn't a screaming deal, but good enough if you don't have a cage at all. If your in a roll over (I'm not talking about a rolling, tumbling roll over) it will keep you safe. However because it is made from HREW, if you are ever in a roll, it will have to be replaced afterwords.
 

Dan's73

Bronco Guru
Joined
Oct 17, 2006
Messages
1,117
I've had the original 4-point Smitty-built cage in 2 of my EB's, one that I added the WH front cage kit to and another that ended up a base for a full "family" cage. Both were good, solid pieces and certainly better than nothing. The one with the WH add-on actually did survive a roll (after I sold it) and, from the pics I saw, looked to have provided really good protection.
 

regshawn

Bronco Guru
Joined
Feb 23, 2006
Messages
2,597
Loc.
Portland
This Shitty built.......I mean smitty built cage may be for sale! If it matter's this was a low speed (less the 20mph) roll over in sand, most walked away.
If you get one I would brace it for sure, and would hate to have seen the results from a roll over on the HWY.:eek: It did it's job and no one died, I would also add they are better then nothing!!!
 

Attachments

  • 100_1470_CHOP.jpg
    100_1470_CHOP.jpg
    141 KB · Views: 132

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,124
Loc.
Cuchara, CO
This Shitty built.......I mean smitty built cage may be for sale! If it matter's this was a low speed (less the 20mph) roll over in sand, most walked away.
If you get one I would brace it for sure, and would hate to have seen the results from a roll over on the HWY.:eek: It did it's job and no one died, I would also add they are better then nothing!!!

That does not look like a Smittybuilt - look where the back bars attach to the main hoop. Smittybuilts have a bolted connection for the back legs on the vertical section - the pic shows a the bars welded to the horizontal section. So it probably is a shittybuilt - a poor imitation! ;D
 

72_EB

Contributor
66to77
Joined
Feb 4, 2003
Messages
4,982
http://www.youtube.com/watch?v=B97NLBWoEp8

Ask DRBRONCO69 if he's happy he had that Smitty in his truck. Rollover tested.

That other rollover pic is not a Smittybilt. Like the other poster said, the Smitty rear legs are bolted.

I ran one for many years and added a rear family section from a Protofab cage for many years which worked great with my old softtop. It is on my buddy's truck protecting his family now too. Only reason I got rid of it was because it won't work with my liftgate supports. Ran it too tight to the rear supports. Fit like a glove with a softtop though.

No, they are not Protofab quality, but certainly better than nothing at all in there. Have you ever seen the sides of a hardtop fold over in a wreck? Not pretty. Don't expect that to save you.

For $200. bucks, if it's local, I'd do it.
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
I would recommend it for $200 especially if it's welded together already and you can go to the seller and test fit it in your rig. You will save $ and half a Saturday of grinding and welding. Not that I don't want to sell you a San Felipe but a deals a deal. ;D

Jim
 

regshawn

Bronco Guru
Joined
Feb 23, 2006
Messages
2,597
Loc.
Portland
That does not look like a Smittybuilt - look where the back bars attach to the main hoop. Smittybuilts have a bolted connection for the back legs on the vertical section - the pic shows a the bars welded to the horizontal section. So it probably is a shittybuilt - a poor imitation! ;D

Your right it does not look like one, but the back legs were altered to fit under his extended half cab. I also think thats what keeped the main hoop from folding more then it would have. Like I said it did it's job and was better then nothing. :p Also if it had a rear section it would have helped and I'm sure it would have spread the weight of the impact.
 
OP
OP
SSDDBRONCO

SSDDBRONCO

Bronco Guru
Joined
Nov 12, 2009
Messages
2,172
Loc.
Los Angeles
hey sorry for the delayed response but i emailed the guy like 3 times but he never replied so now i need to find another roll cage. might as well just invest into a good one.
Thanks
 
Top