• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Something HAS to be wrong (Twin sticked t-case)

supermottl

Bronco Guru
Joined
Feb 18, 2002
Messages
2,360
Loc.
Indian Harbour Bch,
OK folks, here we go again:
I've got a twin sticked t-shift t-case.
Problem: No 4 Hi. Front axle shifter won't shift unless I'm in Low range on the other stick. So, I can only get 4-low. When I'm in 4-low, I can't pop it out of 4wd to 2-low. Also, Front axle shifter will not engage when in hi-range or Nuetral

Is this possible? Is something really effed inside?

correct me if Im wrong, but the shift pattern for the twin sticked t-shift shuold be:

Left stick: right stick:
2wd low range
4wd N
high range

WTF??? :mad:
 
OP
OP
S

supermottl

Bronco Guru
Joined
Feb 18, 2002
Messages
2,360
Loc.
Indian Harbour Bch,
Mine's not like that on the left stick cuz I didn't remove the internal detent rods.

Is there a certain position each shifter should be in order to shift the other???

man, ugggg
 

Panama71

Sr. Member
Joined
Nov 24, 2002
Messages
356
Loc.
Albuquerque, NM
I believe the detent rods prevent the front axle from being engaged when the rear axle is not engaged. So to shift the front I THINK the rear must BE in the range you are shifting the front to. So to put the front in low, the rear must already BE in low. On this part I could be wrong, but that is the understanding I have.
 
Top