• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

SpareParts Build Thread...Linked and tons!

OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
More pics! Both cases are up in the bronco for mock up. I can't get the belly much flatter than I already had it. The 205 is shaped weird, causing me to have to clock it stupid high to get it above the frame rails. The "V" at the bottom of the case is the only thing that's hanging below still. It's still higher by 2" than my link mounts. With the 208, we clocked it about perfect for the rig I guess! Lol

y9ubutut.jpg


gyqesuda.jpg


eby5ajed.jpg


9u2yvuzy.jpg
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
If you cut the big wedge off the top will it go higher? you can cut almost 2" off the corner, you can probably get 1" without having to weld up a hole inthe case.

Got your message this morning I'll call in a bit, provided today doesn't blow up like yesterday....
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Ok, Steve. Unfortunately it's kinda everything that is keeping me from it. Shifters will be a lot harder, front driveline angle will be an issue, fan to water pump pulley clearance, exhaust..... Lol. I'll wait for your call!
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Shifters done and installed...

a5y3y6er.jpg


papu8uru.jpg


atu3y3e4.jpg


Rear 205 mounts are remade. The old ones were just a little different and are going with the other doubler.

2apa3are.jpg


Powder coated them in Silver Vein...

7uma6uha.jpg


jy3ynygu.jpg


asyzahe6.jpg


yna6uqa2.jpg


guny5eqy.jpg


All bolted up, ready to go! I'll test drive it tomorrow.... It got too late and it's raining! Lol
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
One more cool shot, both cases still had the original tags! So I kept them intact.

uheda6yd.jpg
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Better get some practice in, with all them shifters.. lol

Looks great man
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Actually, the shifters have been in the same configuration since I built it the first time. All the doublers have shifted the same, which makes it easy!
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Actually, the shifters have been in the same configuration since I built it the first time. All the doublers have shifted the same, which makes it easy!

perfect.. I guess I've never really sat in your rig to check out the set up :(
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
4ybu6u5u.jpg


5u5e9ere.jpg


Took a cruise over to the river today. New case didn't do anything for the highway, but I also didn't know it was there! So no complains!
 

SC74

Contributor
Bronco Guru
Joined
May 24, 2004
Messages
3,472
I'm liking the idea of a set of road wheels and tires. Do you have a spool in the rear?

Looks good!
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I'm liking the idea of a set of road wheels and tires. Do you have a spool in the rear?

Looks good!

I sure enjoy mine, I drive mine everytime I get the chance. I need to pony up and buy some new ones, mine have been around a long time and been lots of places, starting to get pretty thin
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
I used to have a spool in it, when I did the stretch and links I installed a Grizzly locker in it. It drove fine before, maybe more predicable with a spool, but its nice to not get stares when you slowly pull into a asphalt parking lot squalling tires.

I'm planning on driving it 150 plus miles on fathers day weekend. Going up to the MOEB Hooters gathering and then to my nieces graduation party. I love driving mine around.
 
Top