• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

SpareParts Build Thread...Linked and tons!

farmerjohn

Jr. Member
Joined
Aug 28, 2011
Messages
124
Thanks, I am at the cross roads..... coil overs , ORI, or good 'ol coil springs and some Bilsteins. I hope mine turns out as nice! I have a great start, it's just all torn apart right now.
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Coils and reg. shocks are hard to package but the cheapest and I think the most predictable. No tuning necessary. I'll probably go with ORI's or air shocks if I do it again.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
All the cool kids (aka badass buggies) were running ORI's in my neck of the woods...
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
me too, coils and shocks or coilovers. Coils are good comprimise and inexpensive, but the tunability of a coilover is the bomb. The stability issues that you hear and read about are tunable and fixable.

I've built with them all, ORI's are ok, and on a dedicated crawler simple but not something that I want on a rig that I travel long distance or have to rely on. Something that has a trailer waiting for it in the parking lot. Air shocks, only on a short course racer that strickly does crawling, they do not ride good, I've tried and tried, but are awesome on those cars.
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Thanks Tasker!

You have a good point about the ride quality Steve. I think the coilovers get a bad rap from those who buy someone else's used stuff and don't take the time to tune them. Not me... Mine was simple, coils are cheap! Lol.
 

farmerjohn

Jr. Member
Joined
Aug 28, 2011
Messages
124
Thanks for the info Guys, Spare Parts, looks killer , nice job! That rear 3 link turned out awesome. Everything did. I watched the videos and it crawled well too. Not trying to hijack this great thread....but, have you played with it as-far-as, sliding it around a corner, cutting a donut, or romping on it down a twisty dirt trail? Reason I'm asking , I see you didn't use sway bars and I plan to use mine at some club competitions, and have a couple of teenage boys who will drive it some! We all race dirt bikes, watch Ken Block videos, and dream of being trophy truck drivers , L.O.L.
Thanks
Club racing is a blast! Raced my 'yota in the stock class and after 10 years of Enduros and Harescrambles, was more, pumped up and excited , than leaving the line w 25 dirt bikes!
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
for doing a lot of higher speed stuff I'd recomend a triagulated 4 link in the rear, the 3 link works and is stable but can have some odd handling, usually no worse than a slightly worn leaf spring pack that gives some wiggle. Bigest reason for doing a 3 link in the rear is it leaves you someplace to put a fuel tank and exhaust, a 4 link eats up that space in a hurry, pipe is not a huge problem but a muffler is next to imposssible, with a stock frame anyway:). faster speeds also get tougher on shock tuning, at speed shock tuning can make or brake any set up.
 

farmerjohn

Jr. Member
Joined
Aug 28, 2011
Messages
124
Thanks Yeller, Have the 4 link parts lying by the Bronco. I'm going C.O. I know that's what I need, just like the $ of the coil springs. I'm looking for someone to buy the coil-overs from who can tune me in! I have no locals resources.....Gotta get to work. Thanks
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Here's who we use for our shock tuning on our Ultra 4, and trust me it was worth the trouble and expense.
http://www.alltechmotorsports.com/

And just for images of good 4 link design here's a good place to look at picutres and drawings. A lot of what we do with a full bodied rig doesn't fit this exact design but sure helps keep one pointed in the right direction. We do campain one of these chassis in Ultra 4, I can tell you they work both crawling and haulin. :)
http://goatbuilt.com/

The only real chassis change we made was we only run the rear sway bar and do not run one on the front, the car HANDLES. The 500HP with the 6spd auto sure helps in the smile department, nothing like going from technical slow crawlin to 100+ and not doing anything but mashin the gas, tapping the shifter and holdin on:eek:;D:cool:

I don't own the car but do work on it, and its stored in my shop. So part of my "pay" is I get to do shake down runs, its a job that somebodies gotta do:p
 
Last edited:

farmerjohn

Jr. Member
Joined
Aug 28, 2011
Messages
124
Damn, that a suckie job for sure....;) Thanks for the links and info. We have our race bikes shocks "tuned" by Factory Connection. We tell them the rider weight, skill level/class, and type of terrain, such-as , rocks, roots of Enduro Racing, or faster closed course GNCC / Harescramble off-road racing, or Motocross. They make a huge difference. Maintenance/servicing, helps as-well :cool:
 

farmerjohn

Jr. Member
Joined
Aug 28, 2011
Messages
124
I guess since we are hi-jacking this awesome thread.....sorry Spare Parts, 2.0 or 2.5 coil overs ?
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Lol, I've been busy! Too much shop time and bit much rest! I would say 2.5's for going even somewhat fast, but I'll let Steve "Yeller" say for sure.


Someone had to get you out Skiddy! Besides, who waits to get rescued till right before the town cruise? Lol

If you think your ride was fast, you should have seen me getting there!
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Yes Dave sorry for the high jack but I know you like the tech. As for shock diameter I've all ways used 2" but on the U4 it runs bypasses as well. Wayne at Alltech can answer that way better than I can
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
I don't care about the hijack at all. Like you said, I like the tech and good info.
 
Top