• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Starter Replacement Suggestions

76BroncoPete

Contributor
Sr. Member
Joined
Mar 1, 2013
Messages
433
I'm looking at replacing my stock style starter soon and was looking for suggestions and personal experiences regarding some of the options available. I have an older set of of headman long tubes and 3speed manual transmission.
 
Last edited:

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
1995 F150 5.0 starter. Get one for a manual transmission. Clean, simple, and best of all, you can get a replacement in a matter of hours in the future should yours die in the middle of Smallville. I run a Mean Green, but for the reasons above I will not be buying another. Wiring is as simple as it gets.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Love my PMGR starter, as stated above...
And it'll crank on 9 volts.
 
Last edited:

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,211
X3. Less of a grunt to remove/install. Easy to acquire. Reasonably priced. In my experience, they last longer too.

Todd Z.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
I just run one of the better ones from the local napa. They have a crap line now to complete with cheap chain stores so ask for the good one.
 
OP
OP
76BroncoPete

76BroncoPete

Contributor
Sr. Member
Joined
Mar 1, 2013
Messages
433
Thanks for the help and suggestions guys. I’m going to swing by napa later today.
 
Top