Community
Buy / Sell
Bronco Tech
Fuel Tank Access Plate
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
Steering box inside frame mount?
- Thread starter Hallboss
- Start date
Good day all! Update on this and a thank you to all that commented. The Redhead Steering Gears box was installed and made a big difference compared to the box that was in there. The guys at Redhead (Auburn WA) were awesome and I had a good conversation with the guy that took in my core.
He did question the Saginaw pump pressure when I told him I was considering the 4 turn instead of the 3 turn. The comment he made was that the PS pump may be supplying too much pressure into the steering, when I told him I thought the steering was a little too snappy with the old 3 turn box. Since the old box was loose and I knew the Readhead Gears box would be tighter, I was concerned with it being too responsive and considered the 4 turn. My setup looks to be a WH conversion... https://www.wildhorses4x4.com/73-77...MIgOqr0IKEkgMVkAitBh3c2ydGEAQYASABEgL9E_D_BwE
Has anyone experienced this with their upgrade to the high flow pump and was there a flow restrictor installed?
He did question the Saginaw pump pressure when I told him I was considering the 4 turn instead of the 3 turn. The comment he made was that the PS pump may be supplying too much pressure into the steering, when I told him I thought the steering was a little too snappy with the old 3 turn box. Since the old box was loose and I knew the Readhead Gears box would be tighter, I was concerned with it being too responsive and considered the 4 turn. My setup looks to be a WH conversion... https://www.wildhorses4x4.com/73-77...MIgOqr0IKEkgMVkAitBh3c2ydGEAQYASABEgL9E_D_BwE
Has anyone experienced this with their upgrade to the high flow pump and was there a flow restrictor installed?
Last edited:
The Auburn store is good. They do quality work there for sure. Been all thru their facility.
The higher flow rate & pressure will take some getting used to. It will seem quite a bit quicker.
You can really notice the difference when running a hyd ram. The pump will fill the ram from the higher flow & pressure MUCH faster & you will definitely have to get used to it.
The higher flow rate & pressure will take some getting used to. It will seem quite a bit quicker.
You can really notice the difference when running a hyd ram. The pump will fill the ram from the higher flow & pressure MUCH faster & you will definitely have to get used to it.
It’s quick, but I’m good with it now. I’m leaving it alone and moving on to the next item on the build list. Thanks.
Similar threads
- Locked
- Locked
