• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Step or no step?

Bruners4

Full Member
Joined
Jul 22, 2019
Messages
286
Loc.
1/2 way to everywhere
I agree on the removal of the little stationary step. Have you looked into the Rock Slide Engineering Step sliders? I'm not sure that they will clear an aux tank but what I've seen, they look like they would. And the other benefit of them is that they protect the sides from the door dings in the parking lots.
 

4xfun

Jr. Member
Joined
May 16, 2005
Messages
128
I am going to be the odd ball here. I am not a big fan of the small steps or hidden steps, but I do like a full length nerf bar or rock rail. You still get the offroad look with functional steps that don't depend or wiring to work. As far as offroading goes, the hidden steps have issues with getting bent or debris getting into the wiring and pivots.

When it comes to removing and replacing the small steps, it they work, put them back on. I let my wallet, my needs, and desires make my declensions. Happy wife means a happy like. If she is happy, don't screw with it. If you are looking to spend a lot of time and money fixing a problem that is already solved, put on hidden steps. That being said, if the wife likes the hidden look and wants hidden steps, jump on it and get it done. At the end of the day, nobody here is going to pony up money to pay for youir steps, but your wife is.

There are lots of options and I have even seen a saddle stirrup used. To each his own.
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
step...
removable when on rocks..
 

Attachments

  • 474611118_10227980547405118_7776710155815746260_n.jpg
    474611118_10227980547405118_7776710155815746260_n.jpg
    190 KB · Views: 103
OP
OP
Torkman66

Torkman66

Contributor
Sr. Member
Joined
Apr 3, 2022
Messages
854
Loc.
New Braunfels, Tx
After removing the small steps (looks much better) did some experimenting with wife getting in and out just using the handles I installed. After figuring out a good method, she can hop in and out great. Even have one on drivers side and helps me as well. So for now, looks like these handles have solved my problem...until we turn 70 in a few years :).

IMG_9245.JPG
IMG_9279.JPG
IMG_9278.JPG
 

Johnnyb

Contributor
Bronco Guru
Joined
Nov 19, 2001
Messages
1,233
Loc.
Flagstaff
I welded a 2" receiver on to the back of my rock-sliders and built a step that is removable with the pin.
 

Attachments

  • 20240924_163043~2.jpg
    20240924_163043~2.jpg
    360.9 KB · Views: 148
  • 20241211_174121.jpg
    20241211_174121.jpg
    242.6 KB · Views: 152

PCB 4x4

Contributor
Sponsor/Vendor
Full Member
Joined
Feb 14, 2025
Messages
247
Those are steps from alibaba. I have the same ones on my tundra.
Our steps aren't from Alibaba m, and they don't look anything like yours. We offer a 1 year warranty on the motors. We now also make them for the Ford F-100 1967-1979.
 

Jimmy k

New Member
Joined
Feb 10, 2025
Messages
16
your Bronco is awesome, the color and stance makes it stand out for sure. It’s truly well done. I can only hope mine comes out half as nice! unfortunately I don’t care for the step but I understand the need for one. I am new to broncos as I just got my first one and I’ve just started my restoration but in my research I’ve not seen a step I like beside the hidden ones. Hopefully you can find another option that fits the quality of the build you have.
 

PCB 4x4

Contributor
Sponsor/Vendor
Full Member
Joined
Feb 14, 2025
Messages
247
yay or nay? would you buy again? part of my concern is if a motor breaks... then what?
We have a 1 year warranty on the motors. Been selling them for 3 years with no problems.
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,361
I plan on building mine out of 1 x 4 or 5 inch tubing. My buddy figured out a way to mount to the frame rails. They will setup against bottom of rockers And only stick out the depth of the flares, app 1.75 inches. Probably would not be hard to install a foldable step that would fold back to bottom of frame rails. Going to finish the rig before I start on those .
 

duffymahoney

Contributor
Bronco Guru
Joined
Apr 26, 2015
Messages
2,734
Our steps aren't from Alibaba m, and they don't look anything like yours. We offer a 1 year warranty on the motors. We now also make them for the Ford F-100 1967-1979.
Alibaba is just like amazon, they don't actually make anything, but sell the same motors as you are using, which is the same motor that is on my 2022 tundra steps.

I bet they work great.
 
Top