• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Stroppe Roll Bar Question

frenchy

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,043
Building a look alike bar for the Roadster. Mine has the bulkhead so the main hoop is in the bed. How tall is the hoop from the floor? My trail rigs hoop is 42 inches. I think that is pretty standard, how tall are yours? Also this will have the bars that run from the main hoop back along the bed rails and then down to the floor in back. For those of you that have these is your tubeing level with the bed rail or is it above the rail a little? Measurements and pics would be great. Want it as close to a stroppe bar as possible so it's period correct for a 66. Thanks

frenchy
 

d4xycrq

New Member
Joined
May 20, 2012
Messages
24
Loc.
Boyertown
Frenchy,

This '77 of mine has a roll-bar with Stroppe stickers on it. Is this what you are talking about?



Horizontals are indeed horizontal:




Ray
 
Last edited:

Baja71

Bronco Guru
Joined
Oct 16, 2004
Messages
2,908
The name escapes me, but someone does make a Stroppe Deluxe bar look-alike similar to the one pictured above. Might save you some trouble.
 
OP
OP
frenchy

frenchy

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,043
d4x nice 77, yes that is the bar Im talking about. What is the hieght of the main hoop from floor to top of tube. And what is the height of the horizontal tube from the floor to the top of tube. Thanks.
TW I bought a kit from Mike Kurkus of extreme fab. It's all bent just need to get measurments, cut and weld. Are you driving the Baja yet?

frenchy
 

Baja71

Bronco Guru
Joined
Oct 16, 2004
Messages
2,908
d4x nice 77, yes that is the bar Im talking about. What is the hieght of the main hoop from floor to top of tube. And what is the height of the horizontal tube from the floor to the top of tube. Thanks.
TW I bought a kit from Mike Kurkus of extreme fab. It's all bent just need to get measurments, cut and weld. Are you driving the Baja yet?

frenchy

Not sure how finished your kit is, but once the foot pads are welded on, the rest pretty much bolts together, if you're trying to be accurate.

I've got about 280 miles on her, still tweaking and a lot more to do.
 
OP
OP
frenchy

frenchy

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,043
Thanks d4xthat is just what I need. Appreciate the help.

frenchy
 
OP
OP
frenchy

frenchy

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,043
TW do you have this bar in your Stroppe?
frenchy
 

Baja71

Bronco Guru
Joined
Oct 16, 2004
Messages
2,908
Well, I know this is an old thread, but I have not been on here in a long time. I absolutely hate to see a direct question to me go unanswered. Yes Frenchy, I have the Stroppe "deluxe" roll bar in mine.
 

Attachments

  • AS2A1412.jpg
    AS2A1412.jpg
    114 KB · Views: 141

Major Tom

Contributor
Sr. Member
Joined
Feb 15, 2012
Messages
597
I had this one custom made
 

Attachments

  • fall 1.jpg
    fall 1.jpg
    255.1 KB · Views: 99
Top