TN Super Celebration Tennessee Parts Thread

[SLC]

I have a set of Galaxie hubcaps in varying condition, with a couple in great shape and a couple not so good. Think I have a couple that have been cut for hubs also. See pics $125

I have a set of slot mags 15x7 Westerns I believe. Not show quality but would polish up nicely for a driver rig. $200

C4 with torque converter, new pan fill dipstick, kick down linkage and repairable column (Needs shift gate plate if I recall) starter and J- shift transfer case. Was told it was running when pulled. $1200.

2- hoods with some rust in the front lip, otherwise decent shape $100 each or $175 for both. Pics upon request

Dash panel for I think a 72’ stripped and primed $100. Pics upon request

Windshield frame in primer with some rust through but very repairable $75 pics upon request

New Halogen headlights with wiring harness $75

Windshield wiper motor and linkage $100

Will be there all through the week. Local 15 minutes away from show field can meet most any time. View attachment 958669 View attachment 958671


View attachment 958672

Are halogen headlights the same as the newer broncos ?

 

[JGbronc]

I have a set of Galaxie hubcaps in varying condition, with a couple in great shape and a couple not so good. Think I have a couple that have been cut for hubs also. See pics $125

I have a set of slot mags 15x7 Westerns I believe. Not show quality but would polish up nicely for a driver rig. $200

C4 with torque converter, new pan fill dipstick, kick down linkage and repairable column (Needs shift gate plate if I recall) starter and J- shift transfer case. Was told it was running when pulled. $1200.

2- hoods with some rust in the front lip, otherwise decent shape $100 each or $175 for both. Pics upon request

Dash panel for I think a 72’ stripped and primed $100. Pics upon request

Windshield frame in primer with some rust through but very repairable $75 pics upon request

New Halogen headlights with wiring harness $75

Windshield wiper motor and linkage $100

Will be there all through the week. Local 15 minutes away from show field can meet most any time. View attachment 958669 View attachment 958671


View attachment 958672

I’ll take the slots!

 

[hunter1]

I’ll take the slots!

Sorry, slots are sold.

 

[JGbronc]

Sorry, slots are sold.

Gotcha, thanks!

 

[stout22]

I'll have some new 10,000 lb winch rope for sale. This is not cable, it is synthetic rope.
11/32" x 82 ft
$35 each rope.

 

[1969miller]

Nice rear bench seat, $300, will bring from CA if prepaid. I can take more specific photos if needed.

 

[SC74]

I'll have some new 10,000 lb winch rope for sale. This is not cable, it is synthetic rope.
11/32" x 82 ft
$35 each rope.

How are the ends terminated, or just bare rope?

 

[1969miller]

I'll have some new 10,000 lb winch rope for sale. This is not cable, it is synthetic rope.
11/32" x 82 ft
$35 each rope.

Also interested

 

[SC74]

How much are you asking for the rock skis?

$125 for the pair. I haven't tried to clean them yet, but the outside is lined with Line-X (actual Line-X, not DIY).

 

[stout22]

I have attached a picture to show how the rope is terminated.
The red wrap is at the drum end and the sleeve is on the other end.

 

[1969miller]

I have attached a picture to show how the rope is terminated.
The red wrap is at the drum end and the sleeve is on the other end.

how many do you have? I'll take at least one! possibly 2 or 3

 

[stout22]

I have four available.
I have 1 rope still available

 

[stout22]

I'm looking for a not perfect window for passenger door. This will be going on our trail Bronco so it can have scatches.
I put the doors on in the winter to keep the wife happy

 

[76FordBronco]

I have a 13 gal poly tank available. I ran it for the for the 20 years I've had the bronco with no issues. I am changing over to the M1A1 and the only reason I'm taking out. It was installed by the PO so not sure what brand it is. I will add pictures later.

 

[SC74]

Driver and passenger side vents. Free, or a cold beer, to a good home - SOLD

Also still need to sell the front and rear bumpers in the pics above.

 

[hunter1]

1972 Original bright windshield trim. Minimal damage in upper left corner that is mostly covered by the upper top corner piece and a couple of very small dings that could easily be tapped out. $75

 

[hunter1]

Design Engineering Muffler heat shield kit
$30 new in box.

 

[Muddy1966Bronco]

Wild Horses billet aluminum hood pin set, black or red bushings, new never installed.
$65

Adjustable Trac bar, only on a few months. I went back to stock. Nut has been shaved some to try to get the tightest adjustment, still works well, doesn’t effect function. One bushing got a little boogered on one side.
$50

I have time to do one more painting of a Bronco, possibly two, before the show. 16x20 canvas. Great gift. This one would need prepaid because of the amount of work and the fact it is custom.
$100

 

[hyghlndr]

The paintings are incredible, we love ours. It is the red one shown above!

 

[hunter1]

VIAIR onboard compressor and tank. $100