• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Swapping ring gear on man trans flywheel?

OX1

Bronco Guru
Joined
Aug 26, 2003
Messages
3,472
Anyone ever do it at home? Tap the old one off, heat the ring gear and freeze the flywheel?? Or is this shop only deal??
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I didn't freeze the flywheel but have used the kitchen oven to heat the new ring. Use a big propane torche. It makes for a happier household.
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
yep heat it should slide right on and or off, just try not to get the plate too hot
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
I knock the old one off with a chisel, clean and de-burr. Using a torch heat evenly until it starts to smoke, hold it with a wire. Drop the new ring on and as it cools I tap it down all around until it rings.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
I've done it also used the kitchen oven to heat up the ring gear. also had a torch to help keep it hot while I tried to get it on. I suggest having a couple sets of vise grips or big C clamps to help hold it while you hammer it on. I dont think I got mine quite hot enough but it did go on without to much pain. Oh yeah dont forget the gloves.
 
OP
OP
O

OX1

Bronco Guru
Joined
Aug 26, 2003
Messages
3,472
OK, thanks all......Sound easier than those 9" retainers, which I did the ice and grill thing with..........
 
OP
OP
O

OX1

Bronco Guru
Joined
Aug 26, 2003
Messages
3,472
Got one from JBG. PN C5AZ6384DX, claims for 74-87 on the tag, but I specified 70. JBG web site only lists one ring gear for all years, this true??
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
For V-8 broncos its true they only used the 164 tooth ring gear. Probably has something to do with the way its listed from the company they get it from.
 
OP
OP
O

OX1

Bronco Guru
Joined
Aug 26, 2003
Messages
3,472
For V-8 broncos its true they only used the 164 tooth ring gear. Probably has something to do with the way its listed from the company they get it from.

Thanks naz, should be good to go then
 
Top