• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Testing the waters…. Titled project value?

jeffncs

Contributor
Bronco Guru
Joined
May 4, 2004
Messages
1,894
Loc.
Raleigh, NC
I have 3 broncos…. Wife’s, my truck and a 3rd one that’s disassembled. Thinking about cutting that 3rd one loose to free up some space and build my truck and later build a 65/66 mustang fastback.

Looking for value of sold as package or as parts.

Title in my name, frame stamp section and glovebox door (frame not avail). (You’ll need to source an aftermarket frame)

Solid 77 stripped body on a body cart - needs front clip work, floors, lower A posts need repair, some other minor work; solid B posts and rear floor area with a couple small spots in rearmost section that need repair), uncut rear quarters, overall excellent condition for being 50yrs old

D44 and 9” both need to be built

Thoughts? Located in Raleigh, NC area.
 
Last edited:
OP
OP
jeffncs

jeffncs

Contributor
Bronco Guru
Joined
May 4, 2004
Messages
1,894
Loc.
Raleigh, NC
Pics of the body for assessment…

IMG_4014.jpeg IMG_4013.jpeg IMG_4015.jpeg IMG_4018.jpeg IMG_4020.jpeg IMG_4019.jpeg IMG_4022.jpeg IMG_4021.jpeg
 

1969

Contributor
Bronco Guru
Joined
Feb 28, 2022
Messages
1,078
Loc.
Reno, NV
I paid $5000 a couple years back for my tub, frame and title. I’m on the west coast.
 

Hopstr

Contributor
Full Member
Joined
Feb 26, 2012
Messages
204
I'm sure you know that frame section with the VIN is going to be a problem for a lot of folks. Depends on which state they are in and which side of that fence they are on.
 
Top