• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Thanks Motoman... (Performance Unlimited)

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
For the awesome steering recommendation. ;D
http://www.emotoman.com/tierod/purerevisted.htm


I've been following some of Motoman's upgrades and really like his technical write-up and review of the Performance Unlimited Bullet Proof steering & track-bar setup. Much of his feedback helped me to choose the Bullet Proof setup over others in the industry. Glad I did because this setup is truly awesome and I couldn't be happier!

I went with the "Rockproof" tie-rod link, and "Race-proof" drag and track-bar links. Then I also upgraded my ends to their Stage-2 extreme duty ends.

Here's a few pics of the install and finished product....


Track-bar:
IMG_0260_zpsc90e609b.jpg


SRE compared to stock bushing (track-bar):
IMG_0261_zps1a9cb6d3.jpg


Had to make a little room with my swaybar endlink brackets:
IMG_0272_zps45bbba35.jpg


IMG_0274_zpsd680f432.jpg


Safety wire:
IMG_0273_zpsc231ed4e.jpg


IMG_0275_zps302803d4.jpg


Finished product:
IMG_0294_zpscf732284.jpg


A little flexing, checking clearance:
IMG_0278_zps647e39b2.jpg


IMG_0279_zps106716cf.jpg
 

motoman

Bronco Guru
Joined
Jan 29, 2002
Messages
1,729
Loc.
Phoenix, AZ
Wow that looks great! Bet it steers like a sports car.... I just upgraded to the stage II heims and can not believe how responsive the steering is..... glad you made the jump! Enjoy!
 

SSDDBRONCO

Bronco Guru
Joined
Nov 12, 2009
Messages
2,172
Loc.
Los Angeles
Looks awesome. Their website is pretty confusing to navigate, but how much did you setup cost if you dont mind?
 

57baja

Contributor
Full Member
Joined
Jan 6, 2009
Messages
252
For the awesome steering recommendation. ;D
http://www.emotoman.com/tierod/purerevisted.htm


I've been following some of Motoman's upgrades and really like his technical write-up and review of the Performance Unlimited Bullet Proof steering & track-bar setup. Much of his feedback helped me to choose the Bullet Proof setup over others in the industry. Glad I did because this setup is truly awesome and I couldn't be happier!

I went with the "Rockproof" tie-rod link, and "Race-proof" drag and track-bar links. Then I also upgraded my ends to their Stage-2 extreme duty ends.

Here's a few pics of the install and finished product....


Track-bar:
IMG_0260_zpsc90e609b.jpg


SRE compared to stock bushing (track-bar):
IMG_0261_zps1a9cb6d3.jpg


Had to make a little room with my swaybar endlink brackets:
IMG_0272_zps45bbba35.jpg


IMG_0274_zpsd680f432.jpg


Safety wire:
IMG_0273_zpsc231ed4e.jpg


IMG_0275_zps302803d4.jpg


Finished product:
IMG_0294_zpscf732284.jpg


A little flexing, checking clearance:
IMG_0278_zps647e39b2.jpg


IMG_0279_zps106716cf.jpg

Nice ride I have the same steering and was wondering what you used to drill the holes for the safety wire? My bit broke like a toothpick:cry:
 
OP
OP
xcntrk

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Wow that looks great! Bet it steers like a sports car.... I just upgraded to the stage II heims and can not believe how responsive the steering is..... glad you made the jump! Enjoy!

The steering is super tight! Borderline too tight with a 3.5 turn box that I run. It's very sensitive to the slightest input, which is good. Polar opposite from the slop of the stock steering. I still have the stock (huge) steering wheel, but I have new 14" waiting to go on. I think that will dial back the sensitivity a bit, plus once the endlinks break-in.

I haven't put my steering stabilizer back on as I'd have to fab something up for the drag-link mount, but I can't tell if the stabilizer is even needed anymore. Once I get the new steering wheel on I'll make the determination.
 
OP
OP
xcntrk

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Nice ride I have the same steering and was wondering what you used to drill the holes for the safety wire? My bit broke like a toothpick:cry:
I used a cobalt bit, drill press, and cutting oil. It was actually a piece a cake to drill the safety wire holes, easier than I expected.

Where I had a problem was drilling my pitman arm out to 3/4". The knuckles are a much softer material and drilled easy, but that damn pitman arm was REAL tough. I drilled that thing over the course of a couple days to keep the heat out.
 

Attachments

  • IMG_0263.jpg
    IMG_0263.jpg
    48.4 KB · Views: 77

motoman

Bronco Guru
Joined
Jan 29, 2002
Messages
1,729
Loc.
Phoenix, AZ
I used a cobalt bit, drill press, and cutting oil. It was actually a piece a cake to drill the safety wire holes, easier than I expected.

Where I had a problem was drilling my pitman arm out to 3/4". The knuckles are a much softer material and drilled easy, but that damn pitman arm was REAL tough. I drilled that thing over the course of a couple days to keep the heat out.

Wow I did not know they were different material. Mine drilled out easy but the angle of the end went the wrong way to work well with the PU steering. So we heating up the metal (pitman arm) and twisted the pitman arm to match the angle better.

Also I called PU and asked why the steering is so tight and he said: "Yes, the Spherical rods ends may take a while for the housing to "relax" into shape. The do not "wear in" but rather the metal in the housing relaxes slightly to the perfect size. This may take several weeks. Just driving does not do it, but rather the stretch and pull of working it side to side does."

I have the 3.5 turn box and love the responsiveness. If it wasn't for the body roll from the rock crawling suspension it would out handle my Mazda 6... LOL

I found that I didn't need a steering stabilizer after installing PU steering. Only once or two when I have clipped a rock on the side of the road did I feel I needed a stabilizer.
 
Last edited:
OP
OP
xcntrk

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Looks awesome. Their website is pretty confusing to navigate, but how much did you setup cost if you dont mind?

Oh man their website is terrible, nor can you actually submit an order online, you have to call them. Which is probably a good thing when dealing with custom measured parts like this... I upgraded a lot of options, larger tubing, betters SRE's, so the prices went up in my case. Steering was around 630 and track-bar about 320.

http://bulletproofsteering.com/fordpricingoptions.html
 

Fireball05

Bronco Guru
Joined
Oct 7, 2012
Messages
1,822
X - could we trouble you for a head on static shot, taken in the garage or just sitting relatively level?

Are you using a drop pitman?
 

mavereq

Bronco Guru
Joined
Feb 19, 2009
Messages
2,092
i thought a smaller steering wheel would make a touchy steering system even more touchy...?

you have a beautiful bronco man. i really like it.
 
OP
OP
xcntrk

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
i thought a smaller steering wheel would make a touchy steering system even more touchy...?

you have a beautiful bronco man. i really like it.

Hmmm, maybe I have that backwards... Time will tell! Thanks... ;D
 
OP
OP
xcntrk

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
X - could we trouble you for a head on static shot, taken in the garage or just sitting relatively level?

Are you using a drop pitman?
I'll get a pic for you. I switched from a drop pitman arm back to the stock pitman because the drag-link mount point changes with this steering setup. That was necessary to maintain parallel drag & track link relationship. I do use a drop bracket for the track-bar. I could never go tie-rod over with this setup for several reasons. 1) I don't have enough suspension lift to get all the angles where they need to be, 2) my swaybar endlink brackets would be totally in the way (need to remove), 3) I would need a track riser in addition to the drop bracket just to get close to the drag-link angle in a TRO setup.
 
Top