The perfect stance....

[bronconut73]

As little lift as possible with a bit of a bulldog stance.

 

[wepuckett]

Here is my latest one with 31's probably could fit 33's on it without doing anything and as far as I know there is no lift body or suspension.

Forgive the angle need to get better pics but trying to get her running so I don't have to push her around.

 

[ZOSO]

3.5" Suspension Lift & 1" body lift on 37x12.5 Goodyear Wranglers with 17x9 Anza's. I'm thinking about getting wheel spacers to help give a wider stance and help with the turning radius.

This! I was going for this set-up on my 74 explorer before I sold it.

 

[americanhorses]

3.5 lift on 33,s

Ohhh, I love halfcabs!

2.5SL and 2BL on 33s

 

[lagbolt]

no words can describe this one!

 

[Yeller]

Pics?

D

Here's 1 of the broncno

At the back of the door sits 5" taller than a freinds original 66 survivor so technically no lift and 37's. It's also 1ton & full width with nothing off a bronco underneath. I've considered putting 35's on it so I can put flares on it

 

[Yeller]

I'm challenged...... Can only post one at a time

 

[SpareParts]

I'll play too.. My calendar pic I just submitted!

 

[BroncKrawler]

Or you could go full width ;D

Coulda, woulda, shoulda

 

[TAC71]

My Bronco on its way to the 40th, when the paint was fresh and before it went on sledgehammer.

 

[WheelHorse]

Yes ketchup and mustard are beauties---could you share porky?

It's the Edward Hyde version of my Bronco.

 

[xfalcon]

no words can describe this one!

Ugly.... just sayin'

 

[BluebroncoNC]

I think my favorite stance to look at is 3.5" with a 1" bl and 35" tires. Having said that, I like my 2.5" lift with 33" tires with flares all around, or I wouldn't have built it that way.

Why didn't I include a picture?

 

[cb21]

I like this one.

 

[joe]

?:? %)

 

[SP66]

It's the Edward Hyde version of my Bronco.

Thanks for the pic, I knew the Bronco not the name. Like it.

 

[okie4570]

Pics?

D

Yeller's pics above. Kyle has pics his posts, will have to do a post search.

 

[muskrat]

what I like

I always liked the LUBR look. I did a 2.5" SL rolliing on 30's. I think this is what the bronco should have looked like coming out of the factory.

However, I am installing a 1" body lift today. My old ones are shot, and I figured the 1" would free up some room for twin sticks, carb spacer, etc.

I hope I like it and my 30" tires don't look too small.

 

[muskrat]

another with the 2.5" lift

Like this pic better.

 

[matt w]

Kinda partial to the stance of my '75, but that's why I rebuilt it to this look...
4" suspension, 3" Body and 37x14 Toyo MTs

Wow great look and I like the doors/top combo.