• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Three speed floor shifter problem

377

Sr. Member
Joined
Aug 24, 2012
Messages
372
Loc.
The Bluegrass State
Hello,
I recently put a three speed floor shifter in my current project and have run into a problem. The shifter is a Hurst shifter from Toms Bronco Parts. When I initially installed it, it was binding and wouldn’t shift. So I got under the truck and compared things to some pictures I found on the internet and it appeared I had the rods incorrectly positioned (wrong rod on top) so I switched them to match the photos I found. Problem solved and the the shifter worked correctly. Tonight I was putting the shifter cover on and moved the shifter and it bound up again. It won’t shift in any gear. I did notice when I initially put the shifter levers on the transmission that when I was positioning the levers in neutral positions like the instructions called for they would bind up then. I could jiggle the levers around a little and get them freed back up. Does this sound like a problem with the transmission or do I just need to mess with the shifter rods? Thanks for any help or advice you guys might be able to give me.
 
OP
OP
3

377

Sr. Member
Joined
Aug 24, 2012
Messages
372
Loc.
The Bluegrass State
It had a completely worn out column shifter. You could basically find first and reverse. Shifting to second and third was pretty much an accident if you found them.
 
Top