Tool and procedure for removing pins from MAF connector

[bcmbcmbcm]

Hey folks,

What is the proper tool and procedure for removing the pins from a MAF sensor connector? I don’t want to mess this up and have to splice on a new one.

Thank you,

Brett

 

[ransil]

amazon or ebay for one of the Chinese pin remover sets.

buy the highest count cheapest one you can find.

for the maf might get away with removing the lock ( red thing) and using a pick and releasing the tab

sample
https://www.ebay.com/itm/59x-Termin...=124219895102e33d00a432434bbebf6ed2184048a74a

 

[bcmbcmbcm]

Thanks. I did use a pic to release the red lock. I then worked out the light blue gasket in the back. I didn’t see what else I should do. I used the pic to move things around but no luck. I called it quits before I was on the verge of breaking something

 

[Rustytruck]

may be this will help. i asked the google god of mechanical devices.

https://www.classicsandperformance....or-replacement/maf-connector-replacement.html