Top of Axle to Frame Measurement? - 1996 Bronco

[rguest3]

I just got a new addition to the herd and wanted to know what the axle to frame measurements are of a V8, 1996 Bronco with stock suspension?

Although in overall excellent condition, I am sure the original springs have sagged some.

 

[Tonka7777]

Not at home right now to check, but i know the top of rear axle to rear bed pan is about 12 inches. Mine was sagging a bit and I put on a new set of shocks back in the March and it leveled everything back out. Mine is a 95.

 

[West Tn Dawg]

I was told 7" on the front and 6" on the back.

 

[bronconut73]

I was told 7" on the front and 6" on the back.

That would be coincidental as that is the same for an eb.

 

[West Tn Dawg]

That would be coincidental as that is the same for an eb.

As you can tell, my reading comprehension is not very good. Never caught the 96 part!:-X:-X
But hey, if you ever need to know what it is on an EB, you got it!

 

[bronconut73]

As you can tell, my reading comprehension is not very good. Never caught the 96 part!:-X:-X
But hey, if you ever need to know what it is on an EB, you got it!

Hahaha!!!

 

[rguest3]

She does seem to be a little low. I went for a cruise last night and the Bronco ran Perfect and drove awesome. But, the springs are definately soft.

It was dark when the truck arrived so I did not get a chance to get suspension measurements.

 

[KyleQ]

Rear suspension? I've got a 96' I can measure off of...