I am installing my front axle after replacing the C bushings and radius arm bushings and was wondering what the torque spec for the C bushing caps and crown nut at the end of the radius arms are.
Thanks
I found a post on another forum that said that the C bushing cap bolts are 90-110 ftlb and the radius arm nuts are 80-120 ftlb. Does this seem right with this much of a variance between high and low torque.
Thanks
I found a post on another forum that said that the C bushing cap bolts are 90-110 ftlb and the radius arm nuts are 80-120 ftlb. Does this seem right with this much of a variance between high and low torque.
Last edited: