• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tracking bar bushing replacement

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
Hey Gang, The bushings in my tracking bar have gone south. I replaced these 23 years ago but I guess nothing lasts forever.:) Here's the problem... the bolt is seized in the sleeve and won't come out. I've pounded on it some but don't want to bend the bracket.
Ideas?
I am toying with the idea of trying to get a sawzall in there. Has anyone else had to deal with this?
TIA,
Jim
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
Hey Gang, The bushings in my tracking bar have gone south. I replaced these 23 years ago but I guess nothing lasts forever.:) Here's the problem... the bolt is seized in the sleeve and won't come out. I've pounded on it some but don't want to bend the bracket.
Ideas?
I am toying with the idea of trying to get a sawzall in there. Has anyone else had to deal with this?
TIA,
Jim

Grab the saw and get to sawing!;D A torch works good too if you are careful. Back in the shop day we ran into this type of thing all the time.

Jim
 
Top