• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Trolling motor wiring question.

collinbrewer

Sr. Member
Joined
Jan 23, 2007
Messages
529
Loc.
Austin
I know this is off topic, but I am in desperate need of some help and I know you guys have the know-how.

I am wiring up a 12/24v trolling motor with a charge/troll switch. I have all the functionality I am supposed to: 12v troll, 24v troll and charge but for some reason I keep burning up the troll/charge switch on long trolls using 24v. The trolling motor is said to pull 48 amps, the batteries have 40 amp breakers on them and the batteries are pretty hefty.

The odd thing is that the switch that I am using is rated 15 amps at 12 volts and 10 amps at 24 volts. It seems as though this is obviously inadequate, but when I stopped by my local marine supply shop, this is what they recommended. I thought the ratings were odd, so I looked for a better rated switch, but they were all rated the same.

Any body have any clue as to what's going on? The help is much appreciated.
 
Top