• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tuff Duff ride

dtm030

Jr. Member
Joined
Jan 22, 2013
Messages
70
Loc.
Jax Beach
Does anyone else find that the james duff 3.5" lift rides really hard. To me it feels like the rear springs are so firm along with the big shocks it doesn't compress?

It all looks like great quality stuff it just rides too firm. I think I might have to take out a leaf or two so it'll soften up some.

It could also have something to do with my bronco having a fibreglass tub being lighter than steel but I wouldn't have thought it would be that much different.

Just thought I'd see what other users are thinking about theirs. Thanks.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
i have JBG 5.5" springs and a glass tub and mine is stiff in the rear also. I was considering pulling the 3rd leaf down this spring. It rides way better with no rear shocks, one is a tad rough, and two just plain BLOWS!

I just think its the nature of the beast. My other vehicle is a cadillac deville so its hard to go from one to the other sometimes.
 

BRONCOBERT

Sr. Member
Joined
Sep 2, 2012
Messages
731
I have the Duff 3.5 monster lift with 8 shocks and Deaver springs in the back, is that the one? I may get custom valved shocks, not sure if that would help though. If its new I'm sure it has a break in period where its rough.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
If its new I'm sure it has a break in period where its rough.

Ya how many miles on it so far and how many shocks you using? I put 2000 miles on mine and it didnt break in. Sometimes i consider going shockless in the rear.
 
Last edited:

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
You're probably light. Add weight or pull leaves, definitely ditch the "dual" rear shocks.
Also make sure you don't have over tightened bolts at your leafs, shackles, shocks, ...
They need to be tight enough but not so much that the suspension can't move pretty freely.
 

BRONCOBERT

Sr. Member
Joined
Sep 2, 2012
Messages
731
The bolts they supplied were so short I had to really tighten them to catch enough threads.
I think I will have to change those bolts now damn it!
 
OP
OP
dtm030

dtm030

Jr. Member
Joined
Jan 22, 2013
Messages
70
Loc.
Jax Beach
I think mine is called the ultimate suspension by james duff.

Thanks for the info fellas. I knew I wasn't crazy and that it is a little rough. I'm going to take off a couple of the rear shocks tomorrow and see what that does.

bknbronco- if you take the shocks off and it rides good that means the socks are too firm and that softer ones would probably make it ride great but what ones?
 

ZOSO

Sr. Member
Joined
Jan 25, 2003
Messages
385
Shocks make a big difference. My dads 74 has WH 3.5 springs with rs9000's and rides like a dream. I rode in a buddies truck with the same springs but WH provided shocks and it was a stiff ride. I run deavers on my 79 with just one duff shock in the front and it rides great.
 

BRONCOBERT

Sr. Member
Joined
Sep 2, 2012
Messages
731
I like the dual shock idea but need to get ones that will ride softer or break this baby in.
 

br0nc0xrapt0r

Loves pickles
Joined
Sep 28, 2007
Messages
5,439
How tight are your bolts on the rear shackles? If they are too tight they will not allow the spring to properly compress.
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
My first Bronco had the Duffs Ultimate Lift installed and it was REALLY stiff. I did not care for the 8 shock set up at all. I removed the 2nd pair from the front and rear and it helped, but still pretty stiff.

Have installed the WH lift since then with Bilsteins on 6-7 other EBs and have been extremely happy with this set up.
 

JRED

Sr. Member
Joined
Aug 13, 2006
Messages
362
What should the rear u bolts be torqued to? I have the same setup and it is very stiff. I always thought it was the way that a bronco should ride though. Thanks
 

BRONCOBERT

Sr. Member
Joined
Sep 2, 2012
Messages
731
I brought my neighbour for a drive up a country road that has been patch repaired and lots of frost cracks, anyway he said he was never so scared in his life that we were going to bounce right into the ditch. To be honest it felt a little stiff and choppy but at no point did it feel out of control.
 

01Dudley

Sr. Member
Joined
Jul 16, 2012
Messages
974
Loc.
Knoxville
Break in period yes, check shackle bolt for over tightening yes, and do you know if you got the HD springs or the MD springs? Weight is a big deal when deciding which springs to purchase. If you told us you had a large rear bumper, tire carrier, cage, hard top, then we would have suggested HD springs. If you do not have cage, tire carrier, and are running w/o the hard top then yes the HD springs could give a stiff ride. On the other hand since your vehicle doesn't have sway bars(I'm guessing) stiff is not a bad thing. With the 4 shocks in the back it really helps eliminate body roll. There are many different configurations to run your vehicle at and you should find the best combination for your driving style. If that means taking off 2 shocks, removing a leaf, or switching to a different leaf then so be it, but keep in mind all of these may affect the height in the rear if you all the top or tire carrier etc.
 

BRONCOBERT

Sr. Member
Joined
Sep 2, 2012
Messages
731
How do I know if my rear Duff springs are HD or MD? Also have you guys figured out what Fox shocks would work well with the 3.5 monster lift, 8 shocks.
 

01Dudley

Sr. Member
Joined
Jul 16, 2012
Messages
974
Loc.
Knoxville
I have seen some guys on here running the Fox shocks, but no we haven't investigated it. I can look up your history and see what part number you ordered, but to verify look for a number on the spring. It will to a 55xx or 56xx
 

BRONCOBERT

Sr. Member
Joined
Sep 2, 2012
Messages
731
OK Just looking at my recept it says KIT 5000S-MD 3.5 MNSTR NBL, MD
420 X5580D Leaf Spring, 11 LF 66-77B, ea, 2

I think I would be safe in guessing that the MD is Medium Duty Deavers which would be right for my Bronco as I have no big bumper no spare and only use the soft top.

Can not find any numbers stamped on the springs.
 
Last edited:

01Dudley

Sr. Member
Joined
Jul 16, 2012
Messages
974
Loc.
Knoxville
Yes, Yes, and Yes. I suggest removing 2 shocks before removing leafs. Try this and see how it rides. Like I said above this may increase body roll.
 
Top