nobodysfool
Full Member
started putting things back on after getting it home from paint.knowing i would have a few wiring issues i started with the lites heres what i did new side markers headlite harness,rear chassis harness,new taillites(jbg these are nice)alternator harness,petronix.ok so headlites side markers all work,4 ways good,but no power for turn signals?pull the wheel blow out all the dust use crc contact cleaner still no power.go to the fuse box fuse is blown put in another one it blew.my problem is the backup lites stay on until the fuse goes out.the shifter is on the floor i never had this happen wiring is not my favorite thing. i am sure there are many reasons for this anyone have an idea........