Turn Signal Canceller for Ididit Column?

[gnsteam]

I ordered a stock cam to try on my column but you have to remove part of the lever. Would like to see a pic of the cam you ordered.

Instead of ordering a cam from Tom's Offroad. I went out to the shop and created a cam on my own. Using the 1/4" tall shoulder, on the back side of the steering wheel hub.

I designed a one piece aluminum cam that attacts to that shoulder. With a light press fit and two #8 set screws. Not having a CNC mill. I had to make several cuts, rotating the part slightly, to create the cam lobe.

The cam lobe, represents the positions of the pressed in pins. Supplied in the kit. Once installed and tested in the garage. A test drive was in order. The cam seems to work great. I did put a little grease on the cam for good measure. Here is a sketch I made for the cam.

 

[904Bronco]

If it works during the test period, you should have some made and market them

 

[nvrstuk]

What a great fix!! Nice job... there's a market out there!

THIS kind of stuff is what made me happily change to a GM style column... I fought blinkers, cancellation arms every couple yrs for decades (literally for 6 decades + ) because they were bad when FoMoCo made them and when you couldn't buy Ford ones anymore they wouldn't last a year... 10 yrs on my GM style and nothing but smiles. Ford's '74 column was the worst for the lower brg and seal also... lol

 

[Shimmy]

awesome!! could this be made from a 3d printer or?

 

[DirtDonk]

That's fantastic! Was reading your other thread and thinking/wondering, why nobody (the manufacturers that is) has designed a collar that simply fits the commonly available factory style cam. Like this WH 2716 part.
Yours is likely better, because my idea would likely require heavy machining of the aftermarket stuff.

And to be clear, the available version (like linked above) with the single cam, is NOT like the factory originals for at least early models.
My '71, and other friend's '72's and '73's, all seemed to have a 2-lobe cam vs the 1-lobe cam available.
Never seen (yet) the twin cam model. Maybe there's an advantage/disadvantage to one or the other, but that would be an interesting comparison.

Paul