• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Upgraded Axles

Banjer Picker

Bronco Guru
Joined
Sep 25, 2006
Messages
1,405
Looking to upgrade soon. Would appreciate feedback from any of you guys that have upgraded to 31 spline axles. I have a small bearing ('73 bronco)housing, running 35s and will be installing a Detroit. Which vendor/manufacturer would you recommend?

Thanks

Brandon
 

luderchris

Bronco Guru
Joined
Oct 26, 2008
Messages
1,140
Loc.
SouthEast PA
Classic City Off Road. That is where I got everything when I rebuilt my 9" and they beat all other prices by a couple hundred bucks. Received all the correct parts within a week and they were easy to reach on the phone or by email.
 

Nightstick

Bronco guy
Joined
Feb 6, 2010
Messages
2,929
I like the WH extreme duty axles. They come with the bearings installed and use a tapered roller bearing which is better than the stock style bearing. All ya gotta do is take out the inner axle seal and throw em in, very simple. I'm sure others offer similar bearings and whatnot, but I try to support our vendors when possible. I got my seats from CCOR and like Luderchris said they have great customer service. They advertise in the vendor forum.
 
OP
OP
Banjer Picker

Banjer Picker

Bronco Guru
Joined
Sep 25, 2006
Messages
1,405
What are the advantages of the tapered bearings over traditional? Not sure that they are available dmfor the small bearing application. Regarding the seal removal...do you run it with no outer seal at all?

Thanks for the input guys
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
What are the advantages of the tapered bearings over traditional? Not sure that they are available dmfor the small bearing application. Regarding the seal removal...do you run it with no outer seal at all?

Thanks for the input guys

The tapered roller bearings only fit the big bearing housing. WH's has a 31 spline axle kit for the small bearing housing. It is a sealed ball bearing, like the stock one and you use the seal that's pressed into the housing. The tapered roller bearings for the big bearing housings use and outboard seal and the bearings are lubed buy the diff oil.
 

DirtyDave

Jr. Member
Joined
Apr 16, 2011
Messages
59
I just installed a pair of the W/H 31 spline axles into my small bearing 9" yesterday and I can't say enough good things about them. I bought the Detroit and 4-11 gears from Complete Off-road.
 

Nightstick

Bronco guy
Joined
Feb 6, 2010
Messages
2,929
If I were you Brandon, I'd try to find a large bearing housing a drums. I bet that "ford heaven" guy on Craigslist has one and if you don't want the third member you could probably get it cheap. The large bearing style WH has makes life easy.
 

Kyle.malone

Bronco Guru
Joined
Mar 9, 2006
Messages
3,077
Loc.
Norman, OK
If I were you Brandon, I'd try to find a large bearing housing a drums. I bet that "ford heaven" guy on Craigslist has one and if you don't want the third member you could probably get it cheap. The large bearing style WH has makes life easy.

I was in your same boat with the upgrade. I was stuck with a small bearing housing myself. You can either go with the 31 spline axles that WH has for the small bearing housing or locate a big bearing housing locally or go with the currie housing that WH sells like I did. I was really impressed when it arrived.
 
Top