• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

OR Upgraded Axles

BruiserOutdoors

Bronco Guru
Joined
Aug 22, 2013
Messages
1,030
City: springfield
Looking for upgraded early bronco width axles. Figured somebody might be going 1 tons with their build and have axles that will no longer get used.

Narrowed HP Dana 44
Ruffstuff housing 9"
609s
etc..
 

SavageBurro

Contributor
Sr. Member
Joined
Aug 12, 2013
Messages
594
Looking for upgraded early bronco width axles. Figured somebody might be going 1 tons with their build and have axles that will no longer get used.

Narrowed HP Dana 44
Ruffstuff housing 9"
609s
etc..
What's your timeframe? I have 75 bronco d44 in process of rotating C's for ideal castor and pinion angle. 5.89 gears chromo shafts, superjoints, disc, grizzly locker, trackbar riser, ram assist, dom tie rod w 1 ton offset ends; rear 9" w chromo shafts, 5.89s, detroit. Eventually I will likely go to tons but not in the budget for at least a few months.
 
OP
OP
BruiserOutdoors

BruiserOutdoors

Bronco Guru
Joined
Aug 22, 2013
Messages
1,030
What's your timeframe? I have 75 bronco d44 in process of rotating C's for ideal castor and pinion angle. 5.89 gears chromo shafts, superjoints, disc, grizzly locker, trackbar riser, ram assist, dom tie rod w 1 ton offset ends; rear 9" w chromo shafts, 5.89s, detroit. Eventually I will likely go to tons but not in the budget for at least a few months.
and you are "local".

I am hoping to go 4.88. I would like to have some axles by end of summer? I've got some time.
 

SavageBurro

Contributor
Sr. Member
Joined
Aug 12, 2013
Messages
594
Hey Bruiser,
I'm about to pull the trigger on tons. I will soon be advertising my 75 d44 w toms disc, 5.89 gears, grizzly locker, chromo shafts, ctm style joints, C's have been rotated back for 7.5 deg castor and pinion pointed just below tcase output w ~4.5" lift, new knuckles, new axle seals etc, tie rod reamed for 1 ton gm tre. Rear is 75 bronco 9 inch w 5.89s, detroit and chromo shafts.
 
Top