• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

V8 swap parts needed

Status
Not open for further replies.

brocken

Full Member
Joined
Oct 11, 2009
Messages
281
Loc.
Seattle
Howdy guys,

I'm swapping a 302 into my 67 Bronco to replace the stock 6 cyl and I still need some parts. Transmission is on the way and some local members are hooking me up but still missing some stuff.

I need a V8 radiator in good shape. I also need a cheap exhaust manifold and exhaust setup. I'm trying to save money on the exhaust so I can get everything I need. I plan on running headers later and having an exhaust built.
I also need a clutch pressure plate and throwout bearing.

I'm sure there's a bunch of other stuff I'll need to but won't know until everything is apart... ;D
 

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
I have a set of V8 Motor towers I bought from JBG. I welded them on my frame then scrapped it since it was bent. Let me know if you need them.
 

gpete

Sr. Member
Joined
Apr 25, 2007
Messages
400
Howdy guys,

I'm swapping a 302 into my 67 Bronco to replace the stock 6 cyl and I still need some parts. Transmission is on the way and some local members are hooking me up but still missing some stuff.

I need a V8 radiator in good shape. I also need a cheap exhaust manifold and exhaust setup. I'm trying to save money on the exhaust so I can get everything I need. I plan on running headers later and having an exhaust built.
I also need a clutch pressure plate and throwout bearing.

I'm sure there's a bunch of other stuff I'll need to but won't know until everything is apart... ;D
I am doing a cummins 4bt swap i just got rid of my dual flowmaster exhaust, headman headers,they were used but still in good shape they was in the free section. I have a few items left send me a PM
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
I also need a clutch pressure plate and throwout bearing.
Pretty sure I've got a bellhousing, flywheel, clutch fork, throwout bearing, clutch return spring. Might even have the clutch and pressure plate. Have to look. I'm in Phoenix, AZ. This stuffs heavy and shipping would be :eek:

PM me if you need something.
 
Status
Not open for further replies.
Top