value of an EB snow plow??

[defecater]

In the process of putting a full width plow on my dads 67 EB/buggy wheeling rig so he wont have to always be tinkering around with the 74 Bronco he was using previously. I told him I would try to sell the EB plow on craigslist for him. Whats a fair price for one of these. Keep in mind this is in the midwest, where rust has taken a huge toll on EB's and they are quite scarce around here, so I doubt there would be much interest from Bronco owners. Seems to me that the most likely way it will sell is if someone with some other type of smallish 4x4 wanted to adapt it to what they have. anyway, what do you think??

 

[Rox Crusher]

Last fall I bought a used 7' Meyer plow that was used on an EB.

Hydrualic raise / lower and angle adjustment.

Complete with wiring harness.

Reported to be in working condition. Looks like it could use some love so I am rebuilding it.

Got it for 500 bucks plus 100 bucks in gas.

Now that winter is approaching the same set up would go for at least 900, if not more.

 

[JohnJohn]

I am looking for a plow now for my 70 Bronco and have found new ones for $2500 and working used ones for under $500.

 

[KyleQ]

I paid 350 - 7' Western with the cable controlled up down and side to side. Works sweet on my F150

Its funny too, I bought the Bronco and we had to take the plow off it, and then I come back a few months later to buy it

 

[Broncitis]

I've sold several Myers over the years. Typically $4-500 for a manual angle, and $750 or so for power angle if they are in normal used condition. More if super nice or fairly new, less if missing stuff, or if the blade is rusted out or the power hydraulics leak bad or have rust on the chrome.

 

[luvmybronco]

I have a plow setup for a six cylinder bronco for sale if anyone is interested. Complete set up. I doesn't have power angle and the controls are hyd. lines to the selector switch. Make me an offer

 

[defecater]

Not shure what brand this one is. I brought the Bronco and plow to my place to see if I could get either working. After some fiddling I got the plow working. Does not seem to have any major leaks, even despite the heavy rust on the power angle cylinders.

 

[bodiddly]

What's a snow plow??:? lol