73stallion
Bronco Guru
just wanted to show what some idiot did. they cut off the C wedges on the passenger side, then they welded a piece of metal strip on the back and front of the axle tube. they welded metal in the end of the radius arm and cut a piece of tubing to match the axle radius, and put a thin rubber bushing between it and the axle. so the radius arm would actually twist on the axle housing. then they bent the arms to clear the tires to turn, and extended the ends of them about 2".
what some people do, and why I DON"T KNOW..................
what some people do, and why I DON"T KNOW..................