Wanted 3 speed trans V8

[KCBronco74]

I'm converting a 74 from 6 cyl to V8. I'm looking for a reasonable 3 speed trans and V8 adapters to get it going until I can do a NV3550 upgrade next year. Thanks

 

[TheBroncoRanch]

I'm converting a 74 from 6 cyl to V8. I'm looking for a reasonable 3 speed trans and V8 adapters to get it going until I can do a NV3550 upgrade next year. Thanks

I have a few good complete V8 Set-ups I'd sell cheap, but shipping might kill ya from Michigan. If your interested in getting a set-up shipped to you let me know. PM me or e-mail me at thebroncoranch@yahoo.com

Thanks Tom

 

[70_Steve]

I've got a good V8 3-speed and adapter. Pulled both for my NV4500 upgrade. But same deal on shipping. I'm in Phoenix, AZ. PM me if interested.

 

[KCBronco74]

I've got a good V8 3-speed and adapter. Pulled both for my NV4500 upgrade. But same deal on shipping. I'm in Phoenix, AZ. PM me if interested.

I'll try to determine the weight and get a quote. I'm hopeing its not bad, but basing this off of an ebay auction where they guy would ship through UPS Ground anywhere in US for $50. Will let you know....

 

[KCBronco74]

I've got a good V8 3-speed and adapter. Pulled both for my NV4500 upgrade. But same deal on shipping. I'm in Phoenix, AZ. PM me if interested.

Not sure what they weigh, but @75 lbs UPS Ground it would cost $60 from Pheonix to KC. Do you think that weight estimate is close?

 

[SACHEM]

Call Davis Auto wrecking. Tell them Jason with the orange bronco sent you. They are loacted in between Blue Springs and Independence. I know they have what you are looking for.

Or you could buy this

http://kansascity.craigslist.org/car/407640396.html

 

[alien74]

jsut use the 6cyl one and dont get on it on the street it should hold up for a while, might have to move back transfercase a bit and shorten and lengthen driveshafts oh well, thats probably too much hassel

 

[512cadillac]

If you are still looking I have two transmissions from V8 bronco's available. I am in Lincoln,NE it is about a 3 1/2 hour drive if you would want to pick it up. Let me know If you are interested.

John

 

[lonesouth]

posted price and shipping total on my parts for sale thread.