MA WANTED repair prts for C9TB-17683-B remote adjust drvr outside rearview

[chrlsful]

City: Amherst, MA
Price: $ low

---

yes, I have one that’s broken
Wondering what’s available to get this ope back in shape
Have not looked at it for awhile but was linked here by another so
thought I’d drop by here and begin a search.

Thank You, as well, for looking in~
- -Chad
ford prt #
C9TB-17683-B

 

[AZ73]

There's one at NE Ford

early ford Bronco 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 Door mirror remote

early ford Bronco 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 Door mirror remote C9TB-17683-B ford truck f100 1979

www.northeastclassicfordparts.com

and there's a couple noted in this thread:

Internally adjustable driver side mirror

Hi everyone, I was wondering if anyone knew how common it was to have a 77 with a driver side mirror that you adjust from the inside? I have one on my 77 and I haven't ever been able to find parts for it. Thanks! I have one I removed from my 72 if you’re interested I would sell it.

classicbroncos.com

The comment with the diagram from Speedway motors is actually a mustang mirror and too small.

I rebuilt mine and it depends on what's broken on it if you can repair it or not. If you have any questions feel free to PM me.

 

[AZ73]

Also if you look at my build thread #263 I have some detail on how I did mine with internal pix

Barn Find Restomod Build

Back at it After dealing with a miserable 2020 I'm back at it. Had the bumpers and roll bar sand blasted, then took them home, shot with KBS RustSeal gloss black primer to seal them, and as KBS reacts to UV, I coated them with High Teck flat clear. The High Teck will dial down the gloss to a...

classicbroncos.com

 

[chrlsful]

“...have any questions..."
thanks, your so gracious. I will get it out soon. Just remember its ‘broke’ so need to inspect. As
remembered it looked like a weld or braze would not repair.

“...look at my build thread #263..."
perfect. That I’ll do, Enter your name in the search function of build threads I suppose...
Thnx AZ !