• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What to do

fishindude

Contributor
Jr. Member
Joined
Jul 20, 2009
Messages
93
I have a 351 in my bronco now I have been wanting to put in fuel injection in it. I just picked up a 91 mustang with the 5.0 in it. Should I just put the 5.0 in it or should I try to make the fuel injection work on the 351. The 351 is close to stock. Is there a big power difference between the two? I will rebuild the 5.0 if I go that way.
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
what to do, go fishin;D there is a lot more torque with the 351 than the 302/5.0 however the the intake on the 302 will not fit the 351 as the 351's are wider.
 

76MaBronco

Contributor
Bronco Guru
Joined
May 21, 2007
Messages
4,221
Loc.
Massachusetts
I just put an Explorer 5.0 in the Turd...smoked the rear tires with a locker without even thinking about it getting it up onto a trailer...I think the stock 302 had something like 176 HP, while the 5.0 has close to 220 HP. Big difference right there alone...not sure what the 5.8 has.

As a side note, I have another Bronco I'll be building eventually that has a 5.8 slated for it...
 

rsharpnm

Sr. Member
Joined
May 2, 2005
Messages
712
Loc.
Las Cruces
Sad to say, the 5.0 lower intake won't fit on the 351, so you can't just pop the FI parts onto it. You could find a 351 FI intake, but I have no idea if all the 5.0 FI parts will work on it, although I would *guess* they would (injectors, upper intake, etc.).

I would LOVE to find the time/parts/money to go 5.0 in mine! Good luck!
 

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
I just put an Explorer 5.0 in the Turd...smoked the rear tires with a locker without even thinking about it getting it up onto a trailer...I think the stock 302 had something like 176 HP, while the 5.0 has close to 220 HP. Big difference right there alone...not sure what the 5.8 has.

As a side note, I have another Bronco I'll be building eventually that has a 5.8 slated for it...

The stock 5.8s only had around 255hp but they have way more torque than a 5.0. That's what you want in an EB. I would think going from a carbed 5.8 to a EFI 5.0 would be a disappointment as far as power goes.
 
OP
OP
fishindude

fishindude

Contributor
Jr. Member
Joined
Jul 20, 2009
Messages
93
so I was looking into the bcb adapter It looks like I will need to get the lower intake out of a 5.8 I am guessing that I will need the injectors and fuel rail to. Is there anyone who is running mustang injection on there 351? Did the stock mustang pcm work on it or did you have to have some custom programing done.
 

kholding

Bronco Guru
Joined
Sep 6, 2010
Messages
2,209
Loc.
Las Vegas, NV
I sold my stock 351W lower intake with injectors and fuel rail for $50 on eBay. There always seem to be a few on there. You can try and find a Lightning lower intake (more $$$) but then you don't need to buy the BC adapter because the explorer/mustang/lightning/cobra intakes are all a direct fit.
 
Top