Wheels & Tires

[spadus]

is there any resource available that provides all the details on what size rims and tires will fit under a lifted Bronco including backspacing, offsets, etc...? a new wheel purchase is way too expensive to experiment by trial and error.

 

[kenhoop]

I have a 4in lift on my '92 with 35in tires with no rubbing or bottoming out.
Hope that helps

 

[beast]

i have a 72 uncut and it has 2.5 inches of lift and i run it on 31 1050s i use 16 7 inch rims off a 96 dodge pickup had to have the center bored out a half in to fit over the hub but it hides the tires very nice

 

[Apogee]

No, there is no comprehensive wheel fitment guide for EB's, mostly due to the fact that there are so many possible variables when it comes to lifts, aftermarket steering linkages, non-OE Dana 44 knuckles, etc.

Any semi-competent wheel/tire place should be willing to test fit any combination you may like to run. Most will say to stick with a 3.75" backspacing unless you have a 76-77, then 3.5" would be better. How is your rig currently setup (lift, cut or uncut, etc)? What size tire/wheel are you looking at? Obviously dubbing your EB with 20's is not going to require the same sort of input as a bone-stock rig. The more information you can provide, the more helpful the insight you might receive from others.

 

[idhawkdriver]

http://www.builtfords.com/Site/Site/What Fits.html

Here's what I used for my uncut. It at least got me thinking in the right direction.

Hope it helps.