Where / how does bed front sheet metal attach? pics?

[ObscureMachine]

Hey all! About to install the upper seat platform AND the bed panel. In some pics it looks like the bed panel slips under the upper seat platform and welded together. I've also seen it where it looks just the opposite. Or, do they butt together and each weld independently to the brace? pics would help!
Thanks! - Jim

 

[langester]

I believe the seat platform welds to the brace and the rear floor slips under the platform and is spot welded in.

 

[bronkenn]

Either way will work. I put the rear floor pan on top because the seat p[atform is a lot thicker and was able to use the air punch to put the plug weld holes in the rear floor. Also any water forced towards the rear of truck while driving can't get under the seam. Ken

 

[Jamie Chriss]

I did mine underneath, cleaner looking.

 

[rydog1130]

I believe the seat platform welds to the brace and the rear floor slips under the platform and is spot welded in.

correct! ...a little hard to see but there it is