• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wild horses slotted wheels

Broncocw

Jr. Member
Joined
Sep 7, 2018
Messages
72
I'm looking at the slotted mags that wild horses has. My bronco is stock height. Rear quarters are cut. Can I run the 17x9 wheels with no problem? I would like to fill the fender wells a little more than the 15" wheels. If your running these wheels with a stock height bronco, please post pics. I would like to see how it looks
 

BroncoDesignTN

Sponsor/Vendor
Full Member
Joined
Feb 2, 2014
Messages
170
What size tire are you wanting to run? Tire size will determine what fits more so than the wheel size. We ran 33x12.50 with a 1" body lift uncut and it would only rub if the suspension was flexed. It never did rub while on the pavement. I'll let the cut stock guys chime in on size but I would guess a 33" would work for you.

We have since cut the Bronco and still have the 33's on there but we have a 3.5" suspension and 1" body lift. 33's are too small now lol. Here are a couple pics so you can see what I am talking about on ours. The bigger the wheel size = less sidewall of a tire. It really doesn't change the overall fit on the vehicle as far as height goes.
 

Attachments

  • 3:18-2.jpg
    3:18-2.jpg
    102.5 KB · Views: 226
  • Full Top 1.jpg
    Full Top 1.jpg
    78.9 KB · Views: 217
OP
OP
B

Broncocw

Jr. Member
Joined
Sep 7, 2018
Messages
72
I was also thinking I would have a larger variety of tires to choose from with a 17" wheel as opposed to a 15".
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
Might check out this video. It addresses potential problems and the solutions. With stock heigth suspension I think 33s would be as big as you can go. 33s on 17s the side wall gets a bit thin. No problem unless you rare going rock crawling.
https://www.youtube.com/watch?v=UFryCoV1Eac
[youtube]UFryCoV1Eac[/youtube]

The pic below is as close as I can get. This one has 35s on 17x9 Indys.

Jim
 

Attachments

  • sh.jpg
    sh.jpg
    136.1 KB · Views: 114
Top