Will Super Swamper TSL 36x12.50, 15" fit a 2 1/2" susp and 2" Body Lift???

[Craig T]

Will Super Swamper TSL 36x12.50, 15" fit a 2 1/2" susp and 2" Body Lift???

I'm sure tire size is an over-asked question. I hope I have an excuse being new to EB's (after finally dumping that piece-of-S#!T/mud stuck H1 Hummer).

I'd like to go to 36" SS TSL's, but I don't want to go any higher. Will they fit the 2.5" susp and 2" body lift???

Thanks, Craig T

 

[MountainGuy]

it wuould depend on how much your fenders were cut. if they are cut to the body line you probably won't have any problem. I just bought some 36's and have a 3.5" SL and a 2" BL.....i'll send you some pics of them installed in about a week or so if you want. hope this helps...... %)

 

[76 explorer]

i have 3 1/2 suspension and 2 inch body with my fenders cut. and i could easily run 37s so i dont see why you couldnt run 36s with 4.5 inches of lift as long as your fenders were cut

 

[Craig T]

Yes, please send some picks.

When you say "body line", what are you refering to? I cut the fenders using the Bushwacker flares as a template. Can I cut even farther up and still use the Bushwackers?

I appreciate your advice.

 

[76 explorer]

here is a pic of mine with 3.5 suspension,2 inch body, and cut fenders with 36/12.50/15 tsl's

 

[Mr Joe]

Why not just go with 3.5" sl and 2 bl??

Okie, your rig is looking nice ;D

 

[Craig T]

I already have a 2 1/2" sl and 2" body. I really don't want to be any higher. I spend a lot of time in Moab, and most of my local off-roading is in the San Bernardino mountains. One inch can be the difference between being on your wheels and being on you top!

 

[76 explorer]

Why not just go with 3.5" sl and 2 bl??

Okie, your rig is looking nice ;D

thanks mr joe



anyway.... i hope the pic gave you something to go with. i really dont see you having a priblem clearing 36s if your fenders are cut.

 

[ROKDWLR]

Here's mine with 3 1/2" susp. & no bodylift running 35x14.5x15 SSRs and Wareflares. The bodylift went in the next week and I'm now running a 4 1/2" susp. lift.

 

[Pirate EB]

Not the best pic, but only one before I pulled the body. 2" susp, 2" body, K Bar S flares (minimal cutting), and 35x15.50 Swampers.

 

[Craig T]

Hey Pirate, my favorite part of your picture is the specialty racing seat. I bet those seats are light.

 

[Steve]

Here's mine with 36x12.50-15 TSLs. I have a 3.5" suspension lift and 1" body lift. You can see how much I've cut to be able to flex a lot and not cut tires.

 

[Mr Joe]

Very nice GJBroncoMan ;D

 

[Craig T]

It's better than very nice GJBroncoman...It's f#*k!@g perfect!

 

[broncobillc]

I already have a 2 1/2" sl and 2" body. I really don't want to be any higher. I spend a lot of time in Moab, and most of my local off-roading is in the San Bernardino mountains. One inch can be the difference between being on your wheels and being on you top!

I have a 4 1/2" suspension 2" body & 36" swampers and crawl all over big bears trails. Hardly ever feels super tippy with my set up up there.