• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Window binding

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
Broke another window crank and it happened while trying to roll up my driver window. Can't figure out what's binding it.

Any ideas before i start tearing into it?.. Again..

I have power window set-up to install but before I do it, I need to address the binding problem.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I've had the regulators bind up. Mine had a small hole for lubrication. That helped for a while but mine were terminal and eventually had to be replaced.
 
OP
OP
Madgyver

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
Could it be the window felt in the tracks?
I didnt think to check it the first time....
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
rear window track in my passenger door broke loose from the mounting bolt bracket and caused a bind that would jam the window when trying to roll up.
 
Top