Windshield Washer / Radiator Overflow Combo / Bracket

[71 BRNCO]

I recently purchased the Windshield Washer / Coolant Combo Bottle that most of the vendors sell. I saw in several old posts a bracket that was available to install the bottle and bring it off of the fender apron. It was a well designed bracket that is not longer available. Trying to see if someone might possibly have one to sell (long shot) or if anyone has a CAD drawing of the bracket with measurements or is anyone making a bracket. I can email pictures of what I am looking for.

kylevaughn@cbpbenefits.com
Kyle

 

[1969]

https://classicbroncos.com/forums/threads/coolant-overflow-tank-bracket.327343/

 

[71 BRNCO]

This is the bracket I am trying to purchase or get CAD drawings to have someone make it.

 

[ksagis]

This is the bracket I am trying to purchase or get CAD drawings to have someone make it.

The second post in the thread @1969 posted above shows where you buy the bracket

Coolant overflow tank bracket

I am looking for this bracket for the tank. I suppose I could use one of the fender bolts and drill another hole. But I think the bracket gives a cleaner install. I can’t find it anywhere…

classicbroncos.com

 

[71 BRNCO]

Thank you!!! I completely missed that.

Thanks
Kyle

 

[71 BRNCO]

Thank you!!! I completely missed that.

Thanks
Kyle

 

[BruiserOutdoors]

Hi All!!

Please support Local bronco owners and order from Dan Carr with Carr Parts!! You can find him on facebook and he is working on a website. He builds awesome parts!


https://www.facebook.com/share/p/19UDzuY2Rw/

 

[toddz69]

Hi All!!

Please support Local bronco owners and order from Dan Carr with Carr Parts!! You can find him on facebook and he is working on a website. He builds awesome parts!


https://www.facebook.com/share/p/19UDzuY2Rw/

And that one has sexy dimple die holes in it!

Both of these options are made by forum members and/or EB owners.

Todd Z.

 

[BruiserOutdoors]

And that one has sexy dimple die holes in it!

Both of these options are made by forum members and/or EB owners.

Todd Z.

From what I recall, Both were designed by Jaromy & Brother Travis Smallwood. Jaromy sold his bronco and Dan Carr got permission to use the design file to reproduce them with his twist.

 

[71 BRNCO]

Thanks everyone! I have been in contact with both Travis and Dan. As noted, Travis's is still available on Send Cut Send. Travis is very responsive and since he created the original design, my intentions are to order from him. Price is also a factor for me. Good to hear that Dan got permission as well. What a great community!
Thanks,
Kyle

 

[ntsqd]

I happen to own an FSB with this combo tank in it OEM. I'm on my second one. Strongly suggest doing what I'm about to have to do, and that is to make a strap that goes from one bolt tab to the other around the tanks. What I'm seeing happen is those tabs flex and break where they join the tanks. To be worth anything the strap will need to fit tight.

 

[Bruners4]

I happen to own an FSB with this combo tank in it OEM. I'm on my second one. Strongly suggest doing what I'm about to have to do, and that is to make a strap that goes from one bolt tab to the other around the tanks. What I'm seeing happen is those tabs flex and break where they join the tanks. To be worth anything the strap will need to fit tight.

I'm on my 3rd tank assembly in my '96 Eddie Bauer. I finally put a rubber tarp tiedown on it to hold it up.

 

[904Bronco]

I retrofitted one on my 79 Bronco...

 

[JeepGuy]

I had no idea someone made a bracket for this set up. I just went out and cut a piece of angle iron that mounts to the fender then tank. I can see how over time without support on the bottom that becomes an issue.

Once again, the knowledge base on this site delivers!

 

[Torkman66]

https://classicbroncos.com/forums/threads/rad-wiper-bottle-mount.320268/

 

[PCB 4x4]

I actually made a very simple and cost effort setup 5 years ago. Just realized it never got put on our website