Wiring from dash through windshield?

[Jaybird 1975]

Anyone have a picture of how the wiring comes through the dash and up through the windshield? I rewired the bronco and put a new windshield on and now cant remember how to route it to have the least amount of obstruction closing the windshield as possible. Thanks in advance!

 

[hankjr]

howdy. you should have a hole in the back of the dash on the drivers side and a corresponding hole in the windshield frame assuming the windshield is set up for electric wipers. if it was set up for vacuum it might be different. mine was originally vacuum and i had to make the hole in the windshield frame to line up with the dash.

Hank

 

[Steve83]

(phone app link)

 

[SteveL]

When I rewired mine I pulled an extra wire up there for a future pull string.

 

[omureebe]

I taped up the wiring and lubed it up as it's a pain in the rear to get it through there...

 

[bronkenn]

You can see the hole on the right side top where the harness passes through the dash and enters the bottom of windshield frame.