• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wiring harness grommets

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
I have these 6 grommets for the wiring harness. I contacted painless to see where they went and they were less than helpful. I thought maybe #1 were for the rear tail lights, but they seem too big to fit into the hole in the body, and for the connectors to fit through. I think #2 is for the main harness through the firewall on left and right side but want to be sure. #3-4 I have no idea. Any help would be appreciated
 

Attachments

  • grommets.jpg
    grommets.jpg
    49.2 KB · Views: 104

hankjr

Contributor
Bronco Guru
Joined
May 11, 2013
Messages
1,761
1 is for the firewall connection depending on the year. 3 and 4 might be earlier year firewall as well. 2 looks like the rear turn signal (thats where i used them and they fit.

Hank
 
OP
OP
AZ73

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Thanks guys. After reading your comments I remembered I still had the old harness someplace and dug around the garage. The funnel shape is indeed for the firewall wiring harness. Funny, Dennis Carpenter has it listed for an antenna lead.

https://www.dennis-carpenter.com/en...-amp-radio/c70z-18912-s-antenna-cable-grommet

Several vendors sell #4 for the tail light and the painless kit only included one. Northeast Classics lists #3 as Air conditioning hose or wire harness grommet. #2 looks looks like just another option for firewall harness.
 

Attachments

  • grommet.jpg
    grommet.jpg
    77.6 KB · Views: 55
Last edited:
Top