wiring harness to convert to closed bowl dizzy and remote tfi?

[67EB_in_619]

Is there a harness or instructions on making one that will let me use my existing 93 style (on-dizzy-tfi) harness with a closed bowl dizzy (96ish)?

I want to not have to open the whole harness back up , I want to use the wires at the TFI plug near the dizzy, splice in the new mini harness/pigtails/wires/whatever to use a closed bowl dizzy and mount my gray tfi remotely. I saw this post: http://classicbroncos.com/forums/showthread.php?t=197853&page=2
... but the wiring changes I need to do arent clear to me. I dont want to open the harness back up and re-run any new wires the length of it.. I just want to jump into it where the TFI plug is near the dizzy currently without it looking too ghetto... is this possible? Can anyone help with the wiring changes needed and souring of the plug ends?

 

[Steve83]

I dont want to open the harness back up and re-run any new wires the length of it.. I just want to jump into it where the TFI plug is near the dizzy currently without it looking too ghetto... is this possible?

No.

Can anyone help with the wiring changes...?

...and souring of the plug ends?

Amazon, eBay, Ford, local parts stores... Same as any other parts.

I was helping Ryan develop that kit when he had to sell his business, and I don't think anyone else has attempted to make a kit since. I did the mod to Frank's truck, but the exact mods required depend on too many variables for me to try to make a kit.



The mods depend on the exact existing wiring, and which system you intend to convert to (PS or CCD), and which parts you choose to use. No matter which choices you make, there's absolutely no way around hacking the harness.