• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

MS WTB fuel pump

ndrtkrman

New Member
Joined
Feb 8, 2021
Messages
9
WTB Carter M4251 dual action pump. NOS, Rebuilt, or core to be rebuilt. I'm attempting to get some wiper action AND prevent modifying my 67 if at all possible. Any help greatly appreciated!!!! Thanks!

koliver63@live.com
 

markatherton

Sponsor/Vendor
Bronco Guru
Joined
Aug 11, 2004
Messages
1,978
fuel pump.

Is this the v8 fuel pump or 6 cylinder fuel pump? Mark in San Diego; Beach City Broncos
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
I goggled the number you posted to see what showed on E-Bay .
It did . & It gave an Airtex no .40423 as a replacement is this what your looking far. If so your local parts house should be able to get one in from some Wearhouse in BFE.
.
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
The V8 vacuum pumps to run the wipers have been obsolete for a couple of decades now. No new ones being manufactured.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
ok yours is a V8 Then .
Yes I did notice the one I'd found was a 6cyl..
& Back even when I had my parts stor I could not find V8's pumps.
 

markatherton

Sponsor/Vendor
Bronco Guru
Joined
Aug 11, 2004
Messages
1,978
v8 vacuum fuel pump

I have a v8 vacuum fuel pump I might sell. (8 screw) I have had it a long time and I can't tell you if it is rebuilt or brand new because I just don't remember. It is ready to bolt on and use...Mark in San Diego, Beach City Broncos
 

Attachments

  • DSC_7589[1].jpg
    DSC_7589[1].jpg
    67.9 KB · Views: 112
  • DSC_7590[1].jpg
    DSC_7590[1].jpg
    50.3 KB · Views: 121

markatherton

Sponsor/Vendor
Bronco Guru
Joined
Aug 11, 2004
Messages
1,978
fuel pump

Let me see if I can clear this up. The Original 289 vacuum fuel pump will have CARTER on the side of it. It will have 10 screws on the top and 8 on the bottom. It will also have "Made in the USA" on it. If you can find this one it is the "Holy grail". The Ford replacement pump will have 10 screws on the top and 8 on the bottom. Typically it will have "made in Canada" on it. The aftermarket pump (napa, kragen, o'reilly etc) would have 8 screws on the top and 8 on the bottom; All three are obsolete. Mark in San Diego, Beach City Broncos. The one I have for sale is the factory ford replacement.
 

Attachments

  • DSC_0608[1].jpg
    DSC_0608[1].jpg
    4.6 KB · Views: 176
  • DSC_0609[1].jpg
    DSC_0609[1].jpg
    4.2 KB · Views: 192
  • DSC_0611[1].jpg
    DSC_0611[1].jpg
    3.8 KB · Views: 194
  • DSC_0612[1].jpg
    DSC_0612[1].jpg
    4 KB · Views: 214

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
4,101
THere's also an AC replacement that was designed for it. I have one rebuilt, however, it's not the concours correct one.
 

jamesroney

Contributor
Bronco Guru
Joined
Sep 11, 2007
Messages
2,607
Loc.
Fremont, CA
Let me see if I can clear this up. The Original 289 vacuum fuel pump will have CARTER on the side of it. It will have 10 screws on the top and 8 on the bottom. It will also have "Made in the USA" on it. If you can find this one it is the "Holy grail". The Ford replacement pump will have 10 screws on the top and 8 on the bottom. Typically it will have "made in Canada" on it. The aftermarket pump (napa, kragen, o'reilly etc) would have 8 screws on the top and 8 on the bottom; All three are obsolete. Mark in San Diego, Beach City Broncos. The one I have for sale is the factory ford replacement.

This Carter M4251 NOS replacement pump is a 10 screw, made in USA “Carter” logo on the side, with "CARbureTER" logo on the top.

(My U13 military 6 cylinder also uses a 10 screw pump.)
 

Attachments

  • 2F189F38-9F99-4F4A-AB44-08E27BA99F5D.jpg
    2F189F38-9F99-4F4A-AB44-08E27BA99F5D.jpg
    63.3 KB · Views: 119
  • DB3AEE16-6D23-47FE-9589-93A8922C2F5D.jpg
    DB3AEE16-6D23-47FE-9589-93A8922C2F5D.jpg
    136.9 KB · Views: 94
  • 9CB01A64-28B0-4080-BD76-DAAD77EE96DC.jpg
    9CB01A64-28B0-4080-BD76-DAAD77EE96DC.jpg
    108.7 KB · Views: 140
  • 382E2F8D-F760-4519-A9DE-18E298F3AADF.jpg
    382E2F8D-F760-4519-A9DE-18E298F3AADF.jpg
    111.7 KB · Views: 125
  • 840535D5-D02D-44A9-BA59-2B7D9786124B.jpg
    840535D5-D02D-44A9-BA59-2B7D9786124B.jpg
    113 KB · Views: 131

wjochem

New Member
Joined
Apr 17, 2013
Messages
6
As a side note, I've had several with vacuum wipers and still have one. A few things that help is to 'rebuild' the wiper controls, use rainx and apply every couple months and possibly add a vacuum canister/reservoir. The simplest fix is to find an electric motor that mounts where the current vacuum control is. Just have to run a wire...no wiper arms etc to mess with.
 
Top