• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

YA-159 Fan?

Oatmeal

Sr. Member
Joined
May 17, 2009
Messages
664
Hi all,
Came across a NOS Motorcraft 7 blade, 7 1/2" factory flex fan D6DZ-8600-D on eBay.
Says it's for a 6cyl Granada.
Looking at the photos, it looks exactly like the Bronco 7 blade fan.
Very aggressive blade angle, looks like it would move some air.
Is this possibly the same fan with a newer part number?
Trying to keep my 351W cool.
Have a decent size Griffin alum radiator and a Derale six blade 18" rigid fan but,it gets pretty hot after extended idling.
Hans
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
What do you consider "Pretty Hot"?

Is the current 18" fan a Flex Fan or a Rigid Fan? A 18" rigid fan should move plenty of air.

What thermostat do you have installed? Fan shroud installed? Good water pump?

All of these parts to the Cooling System need to be installed and up to par.
 
OP
OP
O

Oatmeal

Sr. Member
Joined
May 17, 2009
Messages
664
What do you consider "Pretty Hot"?

Is the current 18" fan a Flex Fan or a Rigid Fan? A 18" rigid fan should move plenty of air.

What thermostat do you have installed? Fan shroud installed? Good water pump?

All of these parts to the Cooling System need to be installed and up to par.
If you read the entire post it says: "Derale 18" 6 blade rigid fan"
Not asking for advice on how to cool my Bronco, want to know if the fan in question could be the same fan as the OEM Bronco 7 blade fan.
The description refers to it as being 17 1/2" diameter, is the Bronco fan an actual 18"?...the seller measured it "tip to tip"
And no, the fan I have doesn't move a whole lot of air at low speed, where I need it the most.
Hans
 
OP
OP
O

Oatmeal

Sr. Member
Joined
May 17, 2009
Messages
664
Been doing a little digging.
Saw on a Ford truck BB that a guy is using that fan to cool his V8 68' F100 successfully and a V8 swapped Ranger in the hot Texas heat.
Should work well in my Bronco, then.
Found another site that has a bunch of them for a better price:
D6DZ8600D - NOS Parts
https://nospartsltd.com/product/d6dz8600d/
I ordered one.
Hans
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,620
Loc.
PNW
Well Oatmeal, when you include THIS with your question about fans you obviously have an issue cooling your Bronco.

"Trying to keep my 351W cool.
Have a decent size Griffin alum radiator and a Derale six blade 18" rigid fan but,it gets pretty hot after extended idling."

Someone tried to help.
 
OP
OP
O

Oatmeal

Sr. Member
Joined
May 17, 2009
Messages
664
Well Oatmeal, when you include THIS with your question about fans you obviously have an issue cooling your Bronco.

"Trying to keep my 351W cool.
Have a decent size Griffin alum radiator and a Derale six blade 18" rigid fan but,it gets pretty hot after extended idling."

Someone tried to help.
Look,
Not trying to start an argument and I apologize if I got under someone's skin.
I've owned this thing for over 35 yrs and had a few different motors and trannys in it over the years (went from a C4 to an NP435).
Never actually overheats (boils over) but, will get hot enough that you can burn your hand raising the hood after prolonged idle.
My after market temp gauge will read 220* after a while but, will cool down when driving down the road.
Maybe the gauge isn't accurate but, my infrared temp gun will confirm it at the coolant outlet neck.
Maybe I should have wrote trying to keep my 351W "cooler"......runs warmer than I like.
Anyway, my question was about the fan.
Hans
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,620
Loc.
PNW
No idea on the fan. I would have to be able to see if the blades are actually flexible or like all the 7 blade OE fans I've seen and used on Broncos and I can't with those pics in the ad.

The actual stock OE fan pulls a ton of air. Is your pic showing the stock one used on Broncos? That I don't know.

Since if it isnt cooling properly at low speed & rpm then improving air flow is heading in the right direction.

Typically the problem and trying a different fan that would pull more air at idle would be the fix but making sure ALL the other contributors to inadequate cooling are addressed also... mainly shroud, air flow, wtrpump, etc. Do you have a good shroud?
 
OP
OP
O

Oatmeal

Sr. Member
Joined
May 17, 2009
Messages
664
No idea on the fan. I would have to be able to see if the blades are actually flexible or like all the 7 blade OE fans I've seen and used on Broncos and I can't with those pics in the ad.

The actual stock OE fan pulls a ton of air. Is your pic showing the stock one used on Broncos? That I don't know.

Since if it isnt cooling properly at low speed & rpm then improving air flow is heading in the right direction.

Typically the problem and trying a different fan that would pull more air at idle would be the fix but making sure ALL the other contributors to inadequate cooling are addressed also... mainly shroud, air flow, wtrpump, etc. Do you have a good shroud?
Yes,
OEM shroud in place (Remember K bar S), 190* stat and stock pump.
Just got it out of moth balls, been sitting for almost 5 yrs.
Going to do a complete flush and replace the stat just for peace of mind.
Always ran warm at low speed, think I just chose the wrong fan.....just doesn't move a lot of air at idle.
Used to run a Hayden 7 blade with my old (healthy) 302 and C4 (big cooler) and never had a problem.
Tried finding a Flex a lite or Hayden 7 blade and everybody seems to be out of stock and Tom's repro is kinda pricey at a $100
Gonna give it a try.
Hans
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,620
Loc.
PNW
Good shroud fit is beyond important.

$100 is well spent money on an OE type fan design when you can't cool enough.

Another clue on your post is itsbeen sitting for a long time. Most people dont understand the insulation properties of rust on the insdie of a block. Acts lile excellent insulation and therefore greatly restricts heat transfer.

Acid clean the block is usually a necessity on an engine that's been sitting. This allows good heat transfer between the cast and the water. Heat transfer is critical.

Spend the coin on a well designed fan. OE outperforms almost everything that is aftermarket.

Dirt on each and every cooling fin, scale and gunk insulate on every tube on your radiator and rust film in your block are awfully dang good insulators and restrict heat transfer.

You might know all this already but many dont understand efficiency and thermal conduction well.

Good luck, buy the best fan you can. TBP has an OE fan that pulls a ton of air.
 

Pops68

Contributor
Bronco Rookie
Joined
Oct 11, 2010
Messages
1,777
Loc.
Bazetta Township
I have a 7 blade fan that came with my Bronco......is there a number stamped on it somewhere to tell if it is the one you might need? No longer have the Bronco, just a few odds-n-ends that I haven't gotten around to selling. I can get a picture for you if I know where to look for a number/stamp.

Pops
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
When looking closely at the ebey example, it looks very close to the OE fan. It's a couple years newer design so it has double thickness leading edge on each blade but otherwise is the same. It's a good price and new. It is a flexible blade like the OE '66-'77 Bronco fan. I haven't found a better design. It moves a ton of air and is very quiet.
 

JB Fab

Sponsor/Vendor
Bronco Guru
Joined
Mar 21, 2004
Messages
1,518
220* IMHO is just starting to get hot... not panic hot
 
Top