Yet another Power Steering question

[punisher338]

The PO gave me this stuff when I got the Bronco and said ALMOST everything was there to upgrade to power steering, by looking at it I have the pump with lines, the gear box, 1/2 of a shaft with universal at one end, and the belt and bracket. What else do I need to complete everything?

 

[bronko69er]

Other than bolts, you need an upper steering shaft or cut off your current manual shaft and add a joint to join the 2 shafts.
2 groove waterpump and crank pulleys?

 

[DAKOTA7720]

Maybe some tools?

 

[punisher338]

Other than bolts, you need an upper steering shaft or cut off your current manual shaft and add a joint to join the 2 shafts.
2 groove waterpump and crank pulleys?

What kind of joint do I need to add if I cut my existing steering rod? Do any of the vendors on here sell em? Thanks

 

[1970mule]

here are some choices i used.

you will need to grind down your exsisting steering shaft to fit the double D pattern on one end of the yolk.

http://www.wildhorses4x4.com/category/Steering_Yokes

 

[thegreatjustino]

you will need to grind down your exsisting steering shaft to fit the double D pattern on one end of the yolk.

You don't even need to do that. Just get a 3/4" x 3/4" smooth joint.