• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

York On-Board Air

Craig T

Jr. Member
Joined
Oct 7, 2004
Messages
131
Loc.
Westlake Village
Has anybody found a kit for installing York motor driven systems into EB's?

I tried www.onboardair.com They only make kits for Jeeps. What other solutions have members come up with for on0board air?

Thanks for the help.

Craig T.
 

supermottl

Bronco Guru
Joined
Feb 18, 2002
Messages
2,360
Loc.
Indian Harbour Bch,
Hey,
no one makes a kit. I think Onboard air folks put out a poll a while ago to see if there was a demand for the kit, and ther was, so hopefully something will show up. I went and found a compressor and all the A/C brackets and pulleys off a late 60 Mustang w/ a 302 off ebay. I haven't hooked it up yet. Looks like it's gonne be real tight in there, especially with the PS hoses and Alt. and all that junk. You could always go custom too, but I haven't the skillz
 

S/C-HD2002

Full Member
Joined
Apr 22, 2004
Messages
190
Loc.
CO
I am in the process of making a kit for the early bronco. The first prototype has been made. It is designed it to work on 302s or 351s (v belt only). What sort of interest would there be?? I will keep you all updated.

I am trying to decide if I am going to have a bracket only kit with info on the idler, model of york, fan spacing, etc (find it your self) or provide complete bolt in kits.

Hopefully Jon is ok with me posting this here.
 

supermottl

Bronco Guru
Joined
Feb 18, 2002
Messages
2,360
Loc.
Indian Harbour Bch,
I would be VERY Interested in a kit - Everything, minus the york, cuz They are cheap on ebay - I got 2 for $10 bucks each w/ clutch.
I'm unsure if my mustang a/c brackets will fit

Thanks for the update
 

cracker

Bronco Guru
Joined
May 7, 2002
Messages
2,214
Loc.
Pueblo, Colorado
I use the york with the stock brackets from a 302 on my 351W. The compressor mounts on the left side of the motor, above my PS pump. It is a tight fit, but works very well.
 

EricLar80

Bronco Guru
Joined
Jun 14, 2001
Messages
2,170
I made a setup for my serpentine system (late 80's mustang setup). Made it to replace the original AC pump.
-Eric
 
Top