Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
will yukon u joints work with the f150 axle shafts. i want to upgrade my dana 44 with stronger axles and i didnt know if this would work. got the u joints cheap.
They'll work if you have the right size, 5-297x...do you? One of the reason to upgrade to the F150 axles is the larger u-joints relative to the Early Bronco D44's (5-260x).
Whether they work or not, be very careful with the F150 axles spitting out the u joint C clips. The C clips are only held in about half way around. I put tiny spot welds from the cup to the yoke to hold the ujoints in after spitting out a few. Worked great, but kept an eye on them just the same especially with the pricey Yukons u joints. F150 axles are strong tho, so good working man's alternative to chromolly axles.