SOLD ZF trans, flywheel, clutch, slave, starter, etc

[snick]

City: Santa Barbara, CA
Price: $ 700

---

I was originally planning on swapping in a ZF5 but changed my mind and am going with an auto. I got these parts a couple years ago from another member. They have just sat covered in my garage since. The ZF was rebuilt by a professional trans shop before it was installed in the PO’s EB. PO has no problems with it and only swapped it out because he wanted an automatic. Will no separate parts at this time and no shipping. If desired I’ll contact the PO (member here) and try to get the details of the rebuild and shop name.

$700 firm. I’m located in Santa Barbara CA, pick up only. Thanks

 

[Harpooner]

I was originally planning on swapping in a ZF5 but changed my mind and am going with an auto. I got these parts a couple years ago from another member. They have just sat covered in my garage since. The ZF was rebuilt by a professional trans shop before it was installed in the PO’s EB. PO has no problems with it and only swapped it out because he wanted an automatic. Will no separate parts at this time and no shipping. If desired I’ll contact the PO (member here) and try to get the details of the rebuild and shop name.

$700 firm. I’m located in Santa Barbara CA, pick up only. Thanks

Hello, I’m interested in the parts but have some questions… would this mount directly to the original 302 bell housing. And is it the proper adapter to attach to a Dana 20 transfer case? We have a 66 bronco and need to know what we need to put this in our bronco.

We’d be in Santa Barbara on the 12th if pick up would be possible then.

Thanks, Paul 909-649-5574

 

[snick]

This is the small block ZF version so it will bolt directly to your 302. It has the bell housing built into the transmission so you will not use your current bell housing. All of main swap items are included that you will need except 2 items - the ZF to D20 adapter and a ZF crossmember. Both of these items are available from all the major EB vendors and I believe are relatively inexpensive when compared to most of the other EB popular transmission swap adapters. PM me about figuring out a time to meet on the 12th. Thanks

 

[bigmuddy]

Nice price! To the top for snick!

 

[1969miller]

what is the first gear ratio in this trans?

 

[snick]

First gear is 5.72

 

[snick]

Bump

 

[Navycontractor]

I’m interested in Washington state, if you decide to ship

 

[Airborne69]

Hey snick, is this still available?

I'm local and can pick up